Need help?Do you have a question about the Sony KD-55XD9305 and is the answer not in the manual?
Provides essential safety precautions for service personnel, including risks of electric shock and handling lithium batteries.
Consignes de sécurité essentielles pour le personnel de service, couvrant le risque de choc électrique et la manipulation des composants.
Guidelines for safely handling the LCD panel, including grounding, avoiding pressure, and environmental considerations.
Essential safety checks to perform before releasing the set to the customer after repairs.
Details on performing AC leakage tests and methods to find a good earth ground connection.
Explanation of the Smart Core Red LED blinking codes and how they indicate potential problems.
Information on viewing and interpreting diagnostic results on the self-diagnostic screen.
Step-by-step guide on how to access the service mode using the remote commander.
Procedure to check the software version details within the service mode.
Instructions for editing the serial number, noting it can only be set once.
Procedure for selecting and setting the correct model number, which overwrites dependent settings.
Guidance on performing WB adjustments, typically after main board or panel replacement.
Procedure for transferring WB, Mura, and CUC data between components.
Steps to perform a performance check on the Hard Disk Drive.
Procedure for re-registering the Hard Disk Drive.
Steps for diagnosing issues, including confirming symptoms and using troubleshooting charts.
Detailed flowchart for diagnosing and resolving no-power issues.
Flowchart for diagnosing and resolving no-sound issues.
Flowchart for diagnosing and resolving no-picture issues across various inputs.
Troubleshooting steps for errors related to the unit's key switch buttons.
Troubleshooting steps for issues with the infrared remote commander.
Diagnostic steps for wired and wireless network connectivity problems.
Troubleshooting guide for Bluetooth connectivity and functionality issues.
Visual representation of the TV's internal system architecture and component connections.
Detailed pinout and connection layout for the KD-55XD9305 model.
Illustrations showing the physical placement of internal boards within the TV chassis.
Visual guide for proper wire routing and securing methods within the TV.
Precautions and guidelines for handling the panel on a workbench.
Instructions for safely lifting and moving the panel, including recommended grip points.
Detailed guidance on correct and incorrect methods for holding the panel horizontally and vertically.
Procedures for handling panel warping and recovery methods.
Step-by-step instructions for disassembling the stand for the KD-55XD9305 model.
Procedure for removing the rear cover (L GNT) A for the KD-55XD9305 model.
Instructions for installing the Smart Core module on the KD-55XD9305.
Step-by-step instructions for disassembling the stand for the KD-65XD9305 model.
Procedure for removing the rear cover (2L GNT) A for the KD-65XD9305 model.
Instructions for installing the Smart Core module on the KD-65XD9305.
Exploded view of the rear cover assembly for the KD-55XD9305, listing parts.
Exploded view of the SP-BOX assembly for the KD-55XD9305, listing parts.
Exploded view of the LCD panel assembly for the KD-55XD9305, listing parts.
Exploded view of the rear cover assembly for the KD-65XD9305, listing parts.
Exploded view of the SP-BOX assembly for the KD-65XD9305, listing parts.
Exploded view of the LCD panel assembly for the KD-65XD9305, listing parts.
Detailed instructions on how to safely remove the rear cover, including hook unfixing.
Procedures for disassembling heat sinks from BM1 and DPS boards, with important notes.
To Next Page
General
