EasyManua.ls Logo

Sony KDL-46HX820 User Manual

Sony KDL-46HX820
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
− 1 −
Additional Information for Using Sony Wall-Mount Bracket (SU-WL700)
Additional Information for
Using Sony Wall-Mount Bracket (SU-WL700)
Compatible TV models for this Wall-Mount Bracket information:
XBR-55HX929/55HX927/55HX925/55HX920/46HX929
KDL-55HX827/55HX825/55HX820/46HX820
KDL-55NX720/46NX727/46NX725/46NX720/40NX727/40NX725/40NX720
For product protection and safety reasons, Sony strongly recommends that you use the
Wall-Mount Bracket model designed for your TV and that the wall-mounting of your TV
is performed by Sony dealers or licensed contractors.
To Customers
Please provide your licensed contractor with this installation supplement as well as the instructions
(supplied with the SU-WL700 Wall-Mount Bracket). Read these documents carefully for safety and proper
installation.
To Sony Dealers and Contractors
Provide full attention to safety during the installation, periodic maintenance and examination of this
product.
Sufficient expertise is required in installing this product, especially to determine the strength of
the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to
the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the
installation. Sony is not liable for any damage or injury caused by mishandling or improper
installation.
For proper installation, follow your wall-mount bracket instructions and the directions below.
A-DXF-100-
11(1)

Other manuals for Sony KDL-46HX820

Question and Answer IconNeed help?

Do you have a question about the Sony KDL-46HX820 and is the answer not in the manual?

Sony KDL-46HX820 Specifications

General IconGeneral
BrandSony
ModelKDL-46HX820
CategoryLCD TV
LanguageEnglish

Summary

Installing the Wall-Mount Bracket

Prepare for Installation

Open package, verify parts, and decide TV installation location using the dimension table.

Detach Table-Top Stand

Remove screws from the TV to detach the table-top stand safely.

Attach Mounting Bracket

Temporarily attach the mounting bracket to the rear of the TV using screws.

Secure Mounting Bracket

Securely tighten the mounting bracket to the TV's rear using specified screws and torque.

Adjust Mounting Bracket Angle

Adjust the angle of the mounting bracket using the supplied hexagon wrench.

Install TV on Wall

Install the TV onto the wall mount, requiring at least two or three people for safety.

Related product manuals