Why does my Sony KDL-50W82xB TV remote not function?
If your Sony TV remote isn't working, try replacing the batteries first. Also, check if your TV is in SYNC mode. If it is, press the SYNC MENU button, select [TV Control], and then choose either [Home (Menu)] or [Options] to regain control of your TV.
What to do if Sony KDL-50W82xB TV is frozen or not responding?
If your Sony TV freezes, shows a blank screen, or stops responding to the buttons on the TV or remote, perform a simple reset. Unplug the AC power cord for two minutes, and then plug it back in.
How to fix a Sony KDL-50W82xB with no picture and no sound?
If your Sony TV screen is dark and there's no sound, start by checking the antenna or cable connection. Then, ensure the TV is connected to AC power (mains) and press the power button on the TV or remote.
Why is my Sony KDL-50W82xB not finding cable TV services?
If your Sony TV isn't finding Cable TV services, first, check the cable connection or tuning configuration. If that doesn't work, try the Digital Auto Tuning feature by selecting [Antenna] instead of [Cable].
Why some programmes cannot be tuned on Sony KDL-50W82xB?
If your Sony TV cannot tune to some programmes, check the antenna (aerial) or dish. If you are using satellite, the cable might be short-circuited or have connection problems, so check the cable connection and then turn the TV off with the Mains power On/Off switch, and turn it on again. If the frequency you entered is out of range, consult the received satellite broadcasting company.
Why can't my Sony TV connect to a wireless router by WPS?
If your Sony TV cannot connect to a wireless router using WPS, and you are using WEP security, select [Easy] t [Wi-Fi] t [Connect by scan list]. Then, select the network name (SSID) you want to connect to.
What to do if I forgot the parental lock password on my Sony KDL-50W82xB?
If you've forgotten your Parental Lock password on your Sony TV, enter 9999 as the PIN code. This PIN code is always accepted.
How to turn off the illumination LED on a Sony KDL-50W82xB TV?
If you do not wish the illumination LED on your Sony TV to light up, you can turn it off by pressing HOME, then select [Settings] t [System Settings] t [General Set-up] t [Illumination LED] t [Off]. You can also press OPTIONS, then select [Illumination LED] t [Off].
What to do if I cannot find the required network name in network setup on Sony KDL-50W82xB?
If you cannot find the required network name in the network setup on your Sony TV, select [[Manual Entry]] and press to enter the network name.
Covers essential safety information, battery use, wireless signal compliance, and installation risks.
Guidelines for safe installation, transportation, topple prevention, and ventilation.
Safety instructions for power components and lists of prohibited usage locations and conditions.
Advice on child safety, handling the TV, and precautions during non-use.
Guides for diagnosing issues based on LED status, system errors, and frozen screens.
Precautions for customers and instructions for dealers/contractors for wall-mount bracket setup.
Covers responsibilities for installation and steps to detach the table-top stand.
Instructions for marking, drilling walls, and securing the wall-mount base.
General| Screen Size | 50 inches |
|---|---|
| Display Type | LED |
| 3D | Yes |
| Smart TV | Yes |
| Wi-Fi | Yes |
| HDMI Ports | 4 |
| USB Ports | 2 |
| Ethernet Port | Yes |
| Resolution | 1920 x 1080 |
| Speakers | 10W + 10W |
To Next Page