Sony KE-P42MRX1 - User Manual

To Next Page

Quick Start Guide

Ecological Paper - Totally Chlorine Free

4-101-936-11 (1)

Printed in Spain

Thank you for purchasing this Sony

product.

After following this step by step guide

you will be able to:

Insert Batteries into the Remote

Control.

Connect the Display Unit to the

Media Receiver Unit.

Connect the AC Cable, Aerial and

VCR to your TV.

Select the language of the menu

screens.

Select the country in which you wish

to operate the set.

Set the current time.

Tune your TV.

Change the broadcast channels into

a different order.

View TV Programmes.

Make sure you insert the supplied batteries using the correct polarities.

Always remember to dispose of used batteries in an environmentally friendly way.

• Use the supplied display interface cable.

• Use the supplied mains lead for the display unit (Type C-4, Type BF or Type C-5, see step 1).

1 Connect the supplied interface cable to the display unit and to the media receiver unit.

2 Connect the supplied mains lead to the display unit.

Only for KE-P42MRX1, KE-P50MRX1 and KE-P61MRX1:

To unplug the mains lead pull down the mains plug holder by pushing in both sides of the holder,

then pull out the plug.

4 Install the display unit using the specified wall-mount bracket or stand.

Before installing the display unit, check the installation instructions of your wall-mount bracket

or stand.

1 Remote control (RM-Y1012):

1 “Notes on Plasma” book.

2 Batteries (AA size):

Only for KE-P61MRX1:

(supplied with the display unit:

PDM-6110)

• 2 Frame Bars

• 4 Screws

1 Coaxial Cable:

Only for KLV-L42MRX1:

(supplied with the display unit:

LDM:4210)

• 2 Speaker jack covers

1 Display Interface Cable: One Cleaning Cloth: One AV Mouse:

2 Mains Leads (Type C-4):

Use these mains leads

(with safety earth) if

you use the set

outside the United

Kingdom and Ireland.

1 Mains Plug holder:

2 Mains Leads (Type BF):

• Use these mains leads

(with safety earth) if you

use the set in the United

Kingdom.

• See “NOTICE FOR

CUSTOMERS IN THE

UNITED KINGDOM

and IRELAND” on

page 2 of the

instruction manual when

using these mains leads.

• These mains leads may not

be supplied depending on

the country.

2 Mains Leads (Type C-5):

• Use these mains leads (with

safety earth) if you use the

set in the Swiss

Confederation.

• These mains leads may not

be supplied depending on

the country.

1 PC Input Cable

Do not remove ferrite cores.

Location of the interface

connections may differ

depending on the model.

Location of the mains lead

connection may be separated from

the interface connections

depending on the model.

Do not connect to

the mains before

all connections

are completed.

Clip on the

AC IN jack

until you

hear

clicking.

Attach the mains plug holder

(supplied) to the mains lead.

• Use the supplied mains lead for the media receiver unit (Type C-4, Type

BF or Type C-5, see step 1).

• Use the supplied coaxial cable for aerial connection.

• The Scart lead is optional, however if you use a Scart lead to connect your VCR it can

improve picture and sound quality when using it.

• For more details of VCR connection, please refer to the section “Connecting Optional

Equipment” on page 50 of the instruction manual.

If you do not have a Scart lead, after automatically tuning the TV, tune in the VCR test signal

to the TV programme number “0” by using the “Manual Programme Preset” option. (for

details of how to manually programme these presets, see page 35, step A of the instruction

manual).

Refer to your VCR instruction manual to find out how to find the output channel of your

VCR.

For more details regarding VCR connection, refer to

“Connecting Optional Equipment to the TV” on page 50

of the instruction manual.

Connecting an aerial

Connecting a VCR with an aerial

OUT IN

Do not connect

to the mains

before all

connections

are complete.

Do not connect

to the mains

before all

connections

are complete.

Connecting the

Display Unit to the

Media Receiver Unit

Checking the

Accessories Supplied

KE-P42MRX1,

KE-P50MRX1,

KE-P61MRX1,

KLV-L32MRX1,

KLV-L42MRX1

Connecting the AC

Cable, Aerial and VCR

Inserting Batteries into

the Remote Control

Other manuals for Sony KE-P42MRX1

Service Manual136 pages

Need help?

Do you have a question about the Sony KE-P42MRX1 and is the answer not in the manual?

Summary

Checking the Accessories Supplied

Remote Control

Lists the RM-Y1012 remote control included with the product.

Batteries

Specifies the AA size batteries supplied for the remote control.

Cables

Details the coaxial cable and display interface cable provided.

Power Cords

Lists the mains leads (Type C-4, BF, C-5) for connecting to power.

Other Included Items

Includes items like the 'Notes on Plasma' book, cleaning cloth, AV mouse, and plug holder.

Model-Specific Accessories

Lists accessories like frame bars, screws, and speaker jack covers for specific models.

Connecting the Display Unit

Connecting the Display Unit to the Media Receiver Unit

Instructions for connecting the display unit to the media receiver unit.

Connecting Power, Aerial, and VCR

Connecting the AC Cable

Guide for connecting the AC cable to the display unit and media receiver.

Connecting an Aerial

Instructions for connecting a coaxial cable for aerial reception.

Connecting a VCR

Guidance on connecting a VCR, potentially using a SCART lead.

Initial TV Setup

Switching on the Set

Steps for connecting to mains and turning on the TV for the first time.

Selecting Language, Country, and Time

Guide to setting the menu language, country, and current time.

Automatic TV Tuning

Procedure for automatically searching and storing broadcast channels.

Changing Programme Order

Instructions for rearranging the order of stored broadcast channels.