To Next PageTo Next PageHow to fix picture or sound noise when viewing a TV channel on Sony KLV-40NX520?
To improve picture or sound quality when viewing a TV channel on your Sony LCD TV, adjust 'AFT' (Automatic Fine Tuning) to obtain better picture reception.
Why is there no color on programmes on my Sony KLV-40NX520 LCD TV?
If there is no color on programmes on your Sony LCD TV, select 'Reset'.
How to fix distorted picture contours on Sony KLV-40NX520 LCD TV?
To correct distorted picture contours on your Sony LCD TV, change the current setting of 'Cinema Drive' to other settings.
Why can't I select the connected equipment on the menu or switch the input on my Sony KLV-40NX520 LCD TV?
If you cannot select the connected equipment on the menu or switch the input on your Sony LCD TV, check the cable connection.
Why is there no color or irregular color when viewing a signal from the Y, PB/CB, PR/CR jacks of my Sony KLV-40NX520 LCD TV?
If you're experiencing no color or irregular color when viewing a signal from the Y, PB/CB, PR/CR jacks of your Sony LCD TV, check the connection of the Y, PB/CB, PR/CR jacks and ensure each jack is firmly seated in its respective jack.
Why can't I select 'Off' in 'Control for HDMI' on my Sony KLV-40NX520?
If you have connected any audio system that is compatible with Control for HDMI, you cannot select 'Off' in this menu. To change the audio output to the TV speaker, select 'TV Speakers' in the 'Speakers' menu.
General| Screen Size | 40 inches |
|---|---|
| Resolution | 1920 x 1080 pixels |
| Display Type | LCD |
| Backlight | LED |
| Refresh Rate | 60 Hz |
| HDMI Ports | 4 |
| USB Ports | 1 |
| Audio Output | 10W + 10W |
| Ethernet Port | Yes |
| Viewing Angle | 178 degrees |
| Wi-Fi | No |
