Need help?Do you have a question about the Sony KV-32XBR25 and is the answer not in the manual?
Lists models within the same series.
Testing for electrical leakage from the TV.
Identifies physical controls and input/output connectors on the TV.
Guide to navigating and using the TV's on-screen menu system.
Instructions for enabling or disabling cable input.
Steps to scan and store available TV channels.
How to view television broadcasts and select channels.
Explains features like Muting, Display, Sleep Timer, and DEMO.
How to choose picture and sound settings for different content types.
Instructions for using the Picture-In-Picture functionality.
Guide to adjusting picture and sound settings like brightness, contrast, and color.
How to adjust screen display elements like captions and labels.
Setting up functions like sleep timers and auto-on timers.
How to program and select favorite TV channels.
Using the remote to control connected AV equipment like VCRs.
Common issues and their solutions for the TV.
Steps to remove the back cover of the TV.
How to remove the chassis assembly and H bracket.
Instructions for removing the antenna connection board.
Steps to remove the UT bracket.
How to remove the G bracket.
Procedures for removing the D board.
Steps to remove the U bracket.
How to detach and remove the TV speakers.
Details about internal connector cables and their routing.
Recommended setup for servicing the TV.
How to remove the degaussing coil for specific models.
Instructions for safely removing the picture tube.
Techniques for repairing circuit boards with chip components.
Adjusting the electron beam for proper picture alignment.
Calibrating the convergence of red, green, and blue electron beams.
Adjusting the focus control for a sharp picture.
Adjusting screen brightness and color balance.
Adjusting the sub-brightness for optimal picture quality.
Verifying and readjusting component R565.
Verifying and readjusting component R566.
Checking the B+ voltage level on the G board.
Performing electrical adjustments using the remote control.
Steps to exit the service mode.
How to save adjusted settings into memory.
Verifying that settings have been saved correctly.
Adjustments specific to the A board.
Adjusting hue and color settings.
Adjusting vertical size of the picture.
Adjusting horizontal size of the picture.
Adjusting the horizontal centering of the picture.
Adjusting various picture parameters like phase, linearity, and bow.
Adjusting filter settings for MPX and FILO signals.
Adjusting the ST VCO for MPX signals.
Adjusting the MPX signal level.
Adjusting pilot cancellation for audio signals.
Adjusting the SAP VCO frequency.
Adjusting audio channel separation.
Adjusting read delay for horizontal and vertical signals.
Adjustments specific to the P1 board.
Adjustments for the VC board, specific to certain models.
First part of system block diagrams.
Second part of system block diagrams.
Third part of system block diagrams.
Fourth part of system block diagrams.
Overall schematic diagram of the TV's frame.
Diagrams showing connections between different circuit boards.
Exploded view of the TV chassis assembly.
Exploded view of the picture tube assembly.
To Next Page
General