Sony LMD-9020 - User Manual

LCD Monitor
LMD-9020
The LMD-9020 is a cost-effective addition to the 8.4-inch*
handheld-type LUMA Professional LCD Monitors,
offering the performance to replace CRT monitors
with the quality expected from the PVM-9L2 range.
The LCD panel of the LMD-9020 offers high resolution
and excellent color reproduction, combined with high
contrast and high brightness. This monitor also has a
wide viewing angle, plus a high level of robustness
thanks to its AR-coated protection panel.
As standard, the LMD-9020 accepts a variety of
analog formats from SD to HD. The unit can be AC,
DC, or battery powered. And, with its slim design and
half-rack width, the LMD-9020 can be conveniently
used on a lap, desktop, or mounted in a rack for ENG
and EFP operations, as well as in mobile applications
and studios. The LMD-9020 also offers the familiar
operational features inherited from the Sony PVM
Series of CRT monitors.
The combination of all these features makes the
LMD-9020 a perfect choice for a smooth migration
from CRT to LCD.
* Viewable area, measured diagonally
■■ Input Versatility
The LMD-9020 provides a range of analog
inputs as standard. For typical SD video
monitoring, analog composite (NTSC/PAL),
analog component/RGB (525/60i and
625/50i), and Y/C (S-Video) signals are
accepted. The LMD-9020 also accepts a
variety of analog progressive SD and HD
formats, including 480/60P and 576/50P,
and high-definition 1080/60i, 1080/50i,
720/50P and 720/60P. It can also accept
1080/24PsF.
■■ High Picture Quality –
High Purity Panel
The LMD-9020 uses a VGA (640 x 480)
resolution LCD panel, with high purity color
filters. The result is high-brightness, high-
contrast images with precise color
reproduction. Also, the LMD-9020 provides
a wide 170-degree viewing angle, both
vertically and horizontally.
In addition, its robust AR-coated protection
layer minimizes the chance of the panel
being scratched during transportation – an
extremely important criteria for use in the
field or in any mobile application.
■■ ENG KIT
The LMD-9020 is a strategic choice for use
in ENG and EFP field operations. When
compared to CRT displays, the picture
contrast of these monitors is much less
affected by ambient light, allowing clear
images to be viewed even under strong
sunlight. For further protection, the optional
VF-509 ENG kit provides a viewing hood,
carrying handle, and connector protector.
■■ Convenient Installation
The LMD-9020 is 5U high and half-rack
wide. Using the optional MB-525 Mounting
Bracket with a nine-step tilt capability, two
units can be installed side-by-side in a 19-
inch EIA standard rack.
Features
575/50i 625 575 16:9/4:3 OO
480/60i
*
525 483 16:9/4:3 OO
480/60P 525 483 16:9/4:3 —
O
576/50P 625 576 16:9/4:3 — O
LMD-9020
1080/24PsF 1125 1080 16:9 — O
1080/50i 1125 1080 16:9 — O
1035/60i
*
1125 1035 16:9 — O
1080/60i
*
1125 1080 16:9 — O
720/50P 750 720 16:9
— O
720/60P 750 720 16:9 — O
* Also accepts 59.94Hz field rate.
System
Total
Lines
Active Line
Aspect Ratio
Composite
Y/C (x 1)
RGB
Component (x 1)
Input Signal
Standard Interface
■■ Other Features
• 4:3/16:9 Switchable Display
• Selectable Scan Size
• Advanced Marker Settings
• Color Temperature/Gamma Selection
• Three-color Tally
• Parallel Remote Control
• Monaural Audio Monitoring
• Protected Controls
• Setup Level for Analog Component and
NTSC signal
• Sub Control on Contrast, Chroma, Phase,
and Brightness
• Blue-only mode
• Monochrome mode
• Power-saving Function
• 4:3 Zoom
Input Signals
MK10322V1.qxd 05.11.28 5:28 PM Page 1

Summary

Monitor Features

Input Versatility

Accepts a wide range of analog and digital SD/HD video input formats.

High Picture Quality

Features a high-resolution panel with excellent color reproduction and wide viewing angle.

Field Operations Suitability

Optimized for ENG/EFP use, offering better contrast in ambient light conditions.

Installation and Mounting

Offers slim design, half-rack width, and rack-mountable options for flexible placement.

Additional Display Features

Includes switchable aspect ratio, selectable scan size, and advanced marker settings.

Specifications

Picture Performance Details

Details resolution, pixel efficiency, aspect ratio, color depth, and viewing angle.

Input and Output Connectivity

Describes the various input and output ports and supported signal types.

General Operational Data

Covers power consumption, environmental conditions, dimensions, mass, and accessories.

Control Panels

Front Panel Controls

Identifies and describes the buttons and indicators on the monitor's front panel.

Rear Connector Panel

Details the various input and output connectors on the rear panel.

Optional Accessories

Accessory Catalog

Lists available optional items to enhance the monitor's functionality.

Sony LMD-9020 Specifications

General

Screen Size	9 inches
Aspect Ratio	16:9
Display Colors	16.7 million
Panel Type	TFT LCD
Input Connectors	Composite
Power Requirements	100-240V AC, 50/60Hz