LSPX-S3 (GB) 5-029-387-11(1)
Making preparations
Listening to music
Charging (When using the unit for the first time, be
sure to charge it for at least 1 hour.)
Connect the supplied USB Type-C® cable and the
commercially available USB AC adaptor to the unit.
Battery charging starts and the charge indicator lights up
orange.
Charging will complete in about 5 hours* and the indicator will
turn off.
* Depending on the ambient temperature or the usage of the unit, the
above time period may vary.
Turning the power on/off
Press the
(power) button.
The
(power) indicator lights up white.
Pressing the
(power) button again turns off the speaker.
1
Start playing music on the BLUETOOTH device and
adjust the volume.
First, do the procedure in “Connecting with BLUETOOTH
devices” to connect to the BLUETOOTH device.
2
Adjust the volume by pressing the / (volume)
button.
By pressing and holding the button, you can continuously
adjust the volume.
On this unit, you can enjoy the following functions as
well.
For details, refer to the Help Guide.
• Stereo Pair function
You can connect two LSPX-S3 units via a BLUETOOTH
connection and enjoy music playback and linked illumination.
• Party Connect function
You can connect multiple speakers compatible with the Party
Connect function*
1
via BLUETOOTH connections*
2
and enjoy
music playback. When multiple LSPX-S3 units are connected,
you can enjoy linked illumination as well.
*
1
Up to 100 units can be connected.
*
2
Products compatible with the Wireless Party Chain function are not
applicable to the connection.
To use BLUETOOTH® devices in combination with the unit via
BLUETOOTH connections, you must pair the unit with each and
every device.
Note
• Before pairing, stop playback on the BLUETOOTH device.
• When the connection is established, it is recommended that you turn down
the volume before any playback. Otherwise, loud sound may output from
the speaker for playback.
1
Turn on the unit and check the (BLUETOOTH)
indicator on the bottom of the unit for activity.
or
Flashing
(Blue)
Lit
(Blue)
Bottom
When the (BLUETOOTH) indicator is double flashing
The unit is in paring mode.
Double flashing
Register the unit on a
BLUETOOTH device.
See
the section
.
When the (BLUETOOTH) indicator is flashing slowly
The unit is searching for paired BLUETOOTH devices.
Flashing slowly
To pair the unit with a
new BLUETOOTH device
(a second or subsequent
device).
See
the section
.
When the (BLUETOOTH) indicator stays lit
The unit is connected with a BLUETOOTH device.
Stays lit
To pair the unit with a
new BLUETOOTH device
(a second or subsequent
device).
See
the section
.
2
Connect the unit with a BLUETOOTH device.
Search for the unit on a BLUETOOTH device and select
[LSPX-S3].
Make sure that the (BLUETOOTH) indicator stops flashing
and stays lit.
You hear a notification sound indicating that the unit is
connected with the BLUETOOTH device.
If a passkey is required on the display of the BLUETOOTH
device, enter “0000.”
• When the unit fails to connect with the BLUETOOTH device, perform
the procedure described in the section
.
Press the (BLUETOOTH) button.
You hear a notification sound and the (BLUETOOTH)
indicator double flashes, which indicate that the unit is
in pairing mode. Perform the procedure described in the
section
.
Hint
• The above instructions are provided as an example. Operations and
screen displays vary depending on your BLUETOOTH device.
• For more information including how to connect with a BLUETOOTH
device/computer, refer to the Help Guide.
Connecting with
BLUETOOTH devices
Making preparations
5-029-387-11(1)
©2021 Sony Corporation
Printed in China /
Imprimé en Chine
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Sony LSPX-S3 o
To Next Page
Need help?
General
Weight and Dimensions
