Sony MDR-270LP Specifications

Enjoy a subtle alternative to earbuds, in a lightweight and stylish design–
without sacricing sound performance – with the Sony® MDR-270LP
headphones. The 30mm drivers make the most of your music and the so
cushioning keeps you comfortable no matter how long you listen.
Functional fun
The subtle color complements nearly any outt while the lightweight design curbs “headphone
hair”.
Comfort that lasts
So ear cushioning keeps the comfort level up, even with your longest playlist.
True sound performance
The 30mm drivers deliver powerful and accurate sound reproduction.
Specications
© 2010 Sony Electronics, Inc. All rights reserved. Features and specications are subject
to change without notice. Non-metric weights and measures are approximate and
may vary. Reproduction in whole or in part without written permission is prohibited.
All rights reserved. Sony and the Sony make. Believe logo are trademarks of Sony.
/Updated: December 22, 2011
Audio
Driver Unit
30 mm, dome type (CCAW Voice Coil)
Frequency Response
14-22,000 Hz
Impedance
24 ohms at 1kHz
Sensitivity (db)
102 dB/mW
General
Design
Open Air, Dynamic
Magnet
Neodymium
Plug
L-shaped stereo mini plug (Gold)
Power Handling Capacity
1,000 mW (IEC)
Hardware
Cord
3.9 . Y type
Weights and Measurements
Weight (Approx.)
Approximately 2.12 oz. (without Cord)
Accessories
Supplied Accessories
Warranty (1)
Operating Instructions (1)
MDR-270LP
Over the Head Fashion headphone

Sony MDR-270LP Specifications

Driver and Sound

driver unit	30 mm, dome type
power handling capacity	1, 000 mW (IEC)
impedance	24 Ω at 1 kHz

Performance

sensitivity	102 dB/mW
frequency response	14 – 22, 000 Hz
mass	Approx. 60 g (2.12 oz) without cord

Connectivity

cord length	1.2 m (47 1/4 in)
cord type	Y type
plug type	Gold-plated stereo mini plug