Sony MDR-EX10LP/VLT User Manual

Specications
© 2011 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without
written permission is prohibited. Sony and the Sony logo are trademarks of Sony. Features
and specications are subject to change without notice. Non-metric weights and
measures are approximate and may vary. /Updated: December 21, 2011
Audio
Driver Unit
9 mm, dome type (CCAW)
Frequency Response
8 - 22,000 Hz
Impedance
16 ohms at 1 kHz
Sensitivity (db)
100 dB/mW
Audio Features
Ear Cups
N/A
General
Design
Earbud
Headband
None
Magnet
Neodymium
Plug
L-shaped stereo mini plug
Type of Use
Portable
Hardware
Cord
47 1/4 in. (1.2 m), OFC Litz cord Y-Type
Power
Power Handling Capacity
100 mW (IEC)
Speaker
Type
Closed, dynamic
Weights and Measurements
Cord Length (Approx.)
47 1/4 in. (1.2 m)
Weight (Approx.)
11 oz. (3 g) without cord
Accessories
Supplied Accessories
Earbuds - S (2), M (2), L (2)
Operating Instructions (1)
Warranty Card (1)
MDR-EX10LP/VLT

Sony MDR-EX10LP/VLT Specifications

General

Brand	Sony
Model	MDR-EX10LP/VLT
Category	Headphone
Language	English

Summary

Product Specifications

Audio Specifications

Details on driver unit, frequency response, impedance, and sensitivity for audio performance.

Audio Features

Information regarding ear cup design and type for audio experience.

General Product Details

Covers design, headband type, magnet material, plug type, and intended use.

Hardware Specifications

Details about the cord, including material and type.

Power Handling

Specifies the power handling capacity of the device.

Speaker Type

Defines the type of speaker used in the product.

Weights and Measurements

Provides cord length and approximate weight specifications.

Included Accessories

Lists the accessories supplied with the product, such as earbuds and manuals.