Sony MDR-X10 - Sony MDR-X10 Ear Pad Installation Guide; Obtain Correct Replacement Ear Pads; Align Ear Pad Tabs with Housing; Press Down Until Audible Clicks

Installing new MDR-X10 Ear Pads
Obtain new ear pad:
P/N 4-430-567-01 (RED) or 4-430-567-11 (BLACK)
Align ear pad tabs with (8) holes shown above.
Press down foam all around until no gaps remain
between ear pad and housing.
Gently press down until “clicks” are heard
Step #1
Step #4
Step #3
Step #2
Rev 10/17/2012