Sony MDR-XB950B1 Service Manual

SERVICE MANUAL
Sony Video & Sound Products Inc.
9-896-371-01
2017A33-1
©
2017.01
MDR-XB950B1
SPECIFICATIONS
WIRELESS STEREO HEADSET
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Chinese Model
Ver. 1.0 2017.01
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
General
Communication system: BLUETOOTH
Specication version 4.1
Output: BLUETOOTH Specication Power
Class 2
Maximum communication range: Line of
sight approx. 10 m (30 ft)
1)
Frequency band: 2.4 GHz band (2.4000 GHz
(CH)
- 2.4835 GHz)
Wireless stereo headset
Power source:
DC 3.7 V: Built-in lithium-ion
rechargeable battery
DC 5 V: When charged using USB
Mass: Approx. 280 g (10 oz)
Operating temperature:
Usage hours:
Rated power consumption: 1.5 W (Except US, CND)
When connecting via the BLUETOOTH
0 °C to 40 °C (32 °F to 104 °F)
(Except RU, E, IND, AUS)
5 °C to 35 °C (41 °F to 95 °F) (RU, E, IND, AUS)
device
Music playback time: Max. 18 hours
Communication time: Max. 18 hours
Standby time: Max. 200 hours
When connecting via the headphone
cable with the unit turned on:
Max. 18 hours
Note: Usage hours may be shorter
depending on the Codec and the
conditions of use.
Charging time:
Approx. 4 hours
About 6 hours of continuous
communications is possible after 1 hour
charging.
Note: Charging and usage hours may
be dierent depending on the
conditions of use.
95 °F)
Charging temperature: 5 °C to 35 °C (41 °F to
Receiver
Type: Closed, Dynamic
Driver unit: 40 mm
Frequency response: 3 Hz - 28,000 Hz
Impedance:
32 Ω (1 kHz) (when using the supplied
headphone cable) (Except AEP, UK)
38 Ω (1 kHz) (when using the supplied
headphone cable) (AEP, UK)
Sensitivity:
105 dB/mW (when using the supplied
headphone cable) (Except AEP, UK)
97 dB/mW (when using the supplied
headphone cable) (AEP, UK)
50 Hz - 8,000 Hz
Microphone
Type: Electret condenser
Directivity: Omni directional
Eective frequency range:
System requirements
for battery charge
using USB
Personal Computer with pre-installed with
any of the following operating systems and
USB port:
Operating Systems
(when using Windows)
Windows
®®
10 Pro
Windows
®®
8.1 Pro
Windows
®®
8 Pro
Windows
®
7
8 / Windows
8.1 / Windows
10 Home / Windows
Home Basic / Home Premium /
Professional / Ultimate
(when using Mac)
Mac OS X (version.10.8 or later)
Design and specications are subject to
change without notice.
T
he Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Sony
Corporation is under license.
T
he N-Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United
States and in other countries.
Microsoft, Windows and Windows Vista are
registered trademarks or trademarks of
Microsoft Corporation in the United States
and/or other countries.
Mac and Mac OS are trademarks of Apple
Inc., registered in the U.S. and other
countries.
iPhone and iPod touch are trademark of
Apple Inc., registered in the U.S. and other
countries.
“Made for iPod” and “Made for iPhone” mean
that an electronic accessory has been
designed to connect specically to iPod or
iPhone, respectively, and has been certied
by the developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance
with safety and regulatory standards. Please
note that the use of this accessory with iPod
or iPhone may aect wireless performance.
Qualcomm® is a trademark of Qualcomm
Incorporated, registered in the United States
and other countries, used with permission.
Qualcomm aptX™ audio is a trademark of
Qualcomm Technologies International, Ltd.,
registered in the United States and other
countries, used with permission.
Android™ is a trademark of Google Inc.
Other trademarks and trade names are those
of their respective owners.
Modulation method: FHSS (Except CH)
Compatible BLUETOOTH proles
2)
:
A2DP (Advanced Audio Distribution
Prole)
AVRCP (Audio Video Remote Control
Prole)
HFP (Hands-free Prole)
HSP (Headset Prole)
Supported Codec
3)
: SBC
4)
, AAC
5)
, aptX
Supported content protection method:
SCMS-T
Transmission range (A2DP):
20 Hz - 20,000 Hz (Sampling frequency
44.1 kHz)
Included items:
Wireless stereo headset (1)
Headphone cable (approx. 1.2 m
(47 1/4 in.)) (1)
Micro-USB cable (approx. 50 cm
(19 3/4 in.)) (1)
Reference Guide (1)
Operating Instructions (1)
Other documents (1 set)
(US, CND, AEP, UK, CH, LA only)
1)
The actual range will vary depending on
factors such as obstacles between
devices, magnetic elds around a
microwave oven, static electricity,
reception sensitivity, antenna’s
performance, operating system, software
application, etc.
2)
BLUETOOTH standard proles indicate the
purpose of BLUETOOTH communications
between devices.
3)
Codec: Audio signal compression and
conversion format
4)
Subband Codec
5)
Advanced Audio Coding
柵䋫剧♘濕3511!NI{!.!!
3594/6!NI{
⌵⭨∃䋫濕Ŭ!31!eCn濃FJSQ濄

Sony MDR-XB950B1 Specifications

General

Power LED	Yes
2.5 mm connector	No
Applications supported	Sony Headphones Connect app
Number of products included	1 pc(s)
Cable color	Black
Cable length	1.2 m
Headset type	Binaural
Product type	Headset
Wearing style	Head-band
Volume control	Digital
Recommended usage	Music
Quantity	1
Cables included	Audio (3.5mm), USB
USB connector	Micro-USB
Frequency band	2.4 GHz
Wireless range	10 m
Bluetooth version	4.1
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
Connectivity technology	Wired & Wireless
Connector contacts plating	Gold
Impedance	32 Ω
Driver type	Dynamic
Driver unit	40 mm
Ear coupling	Circumaural
Headphone frequency	3 - 28000 Hz
Headphone sensitivity	105 dB
Microphone type	Not available
Microphone frequency	100 - 4000 Hz
Battery type	Built-in battery
Standby time	200 h
Battery voltage	3.7 V
Charging source	USB
Battery recharge time	4 h
Continuous audio playback time	18 h
Package type	Box
Package depth	223 mm
Package width	73 mm
Package height	290 mm
Package weight	700 g
Audio formats supported	AAC, SBC, apt-X
Mobile operating systems supported	Android, iOS

Weight and Dimensions

Weight	280 g