•
16
RM
(Rotary Commander)
To
change the operative direction
of
the rotary
commander controls.
- "NORM" (e): to use the rotary commander in
the factory-set position.
- "REV": when you mount the rotary
commander on the right side
of
the steering
column.
AUX-A*' (AUX Audio)
To
turn the AUX source display "AUX-A-ON"
(e) or "AUX-A-OFF" (page 16).
A.OFF (Auto Oft)
To
shut
off
automatically after a desired time
when the unit is turned off,
- "A.OFF-NO" (e), "A.OFF-30S (Seconds);'
"A.OFF-30M (Minutes)" or "A.OFF-60M
(Minutes)."
SUB/REAR*'
To
switch the audio output.
- "SUB-OUT" (e): to output to a subwoofer.
- "REAR-OUT":
to
output to a power amplifier.
DEMO (Demonstration)
To
set "DEMO-ON" (e) or "DEMO-OFF."
DIM
(Dimmer)
To
change the brightness
of
the display.
- "DIM-ON": to dim the display.
- "DIM-OFF" (e): to deactivate the dimmer.
A.SCRL (Auto Scroll)
To
scroll long displayed item automatically
when the disc/album/track is changed.
- "A.SCRL-ON" (e): to scroll.
- "A.SCRL-OFF": to not scroll.
LOCAL (Local Seek Mode)
- "LOCAL-ON" : to only tune into stations with
stronger signals.
- "LOCAL-OFF" (e): to tune normal reception.
MONO*2 (Monaural Mode)
To
improve poor FM reception, select monaural
reception mode.
- "MONO-ON" : to hear stereo broadcast in
monaural.
- "MONO-OFF" (e): to hear stereo broadcast in
stereo.
LPF*3 (Low Pass Filter)
To
select the subwoofer cut-offfrequency: "LPF
OFF" (e), "LPFI25Hz"
or
"LPF 78Hz."
LOUD (Loudness)
To
allow you to listen clearly at low volume
levels.
- "LOUD-ON" : to reinforce bass and treble.
- "LOUD-OFF" (e): to not reinforce bass and
treble.
BTM (page 10)
BT
INIT*'
(page 14)
*1 When the unit is turned off.
*2 When FM is received.
*3 When the audio output is set
to
"SUB."
Using
optional
equipment
Auxiliary audio equipment
By connecting an optional portable audio device
to the AUX input jack (stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your car speakers. The volume level
is adjustable for any difference between the unit
and the portable audio device. Follow the
procedure below:
Connecting the portable audio
device
1 Tum
off
the portable audio device.
2 Turn down the volume on the unit.
3 Connect to the unit.
...
Connecting
cord*
(not supplied)
* Be sure
to
use a straight type plug.
Adjust
the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1 Turn down the volume on the unit.
2 Press
(SOURCE)
repeatedly until "AUX"
appears.
"FRONT IN" appears.
3 Start playback
of
the portable audio device at a
moderate volume.
4 Set your usual listening volume on the unit.
S Press the select button repeatedly until "AUX"
appears, and rotate the volume control dial to
adjust the input level
(-8
dB to +
18
dB).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
