19
GB
USB Device
MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1)
Creating your own program
(Program Play)
1
Select the USB function.
Press USB.
2
Select the play mode.
Press PLAY MODE/TUNING MODE
repeatedly until “PROGRAM”
appears while the player is
stopped.
3
Select the desired file number.
Press / repeatedly until the
desired file number appears.
Selected file number
When programming MP3/WMA
files in a specific folder, press
+/ – repeatedly to select the
desired folder, and then select the
desired file.
4
Program the selected file.
Press to enter the selected file.
5
Repeat steps 3 through 4 to
program additional files, up
to a total of 64 files.
6
To play your program of files,
press .
The program is cleared when
you perform one of the following
operations:
changing the function.
turning off the system.
disconnecting the power cord.
To play the same program again,
press .
To cancel Program Play
Press PLAY MODE/TUNING MODE.
To delete the last step from the
program list
Press CLEAR when playback is
stopped.
To Next Page
Loading...
