MHC-GT55/GT44/GT22.GB.3-098-275-14(1)
12
GB
Setting the clock
Use buttons on the remote to set the
clock.
1
Press /
to turn on the
system.
2
Press CLOCK/TIMER SET
.
If the current mode appears on
the display, press /
repeatedly to select “CLOCK SET”
and then press ENTER
.
3
Press /
repeatedly
to set the hour, and then press
ENTER
.
4
Use the same procedure to set
the minutes.
e clock settings are lost when you
disconnect the power cord or if a
power failure occurs.
To display the clock when the system
is o
Press DISPLAY
repeatedly until the
clock is displayed. e clock is displayed
for about 8 seconds.
To Next Page
Loading...
