Sony MHC-V6D - Page 32

MHC-V6D.GB.4-537-583-11(1)
32
GB
Setting the TV screen
– VIDEO SETUP
[TV TYPE]
[16:9]: Select this when you connect
a wide-screen TV or a TV with a wide
mode function.
[4:3 LETTER BOX]: Select this when
you connect a 4:3 screen TV. This
setting displays a wide picture
with bands on the upper and lower
portions of the screen.
[4:3 PAN SCAN]: Select this when
you connect a 4:3 screen TV. This
setting displays the wide picture on
the entire screen and cuts off the
portions that do not fit.
[COLOR SYSTEM(VIDEO CD)]
(Except for Latin American model)
Sets the color system when you play
back a VIDEO CD.
[AUTO]: Outputs the video signal
according to the color system of
the disc, either PAL or NTSC. Select
this setting, if your TV uses a DUAL
system.
[PAL]: Changes the video signal of
an NTSC disc and output it in PAL
system.
[NTSC]: Changes the video signal
of a PAL disc and output it in NTSC
system.
For details, see “Changing the color
system” (page18).
[BLACK LEVEL]
(Latin American model only)
Selects the black level (setup level)
for the video signals output from the
VIDEO OUT jack.
[ON]: Sets the black level of the
output signal to the standard level.
[OFF]: Lowers the standard black
level. Use this when the picture
becomes too white.
[PAUSE MODE]
[AUTO]: The picture, including
subjects that move dynamically, is
output with no jitter. Normally select
this position.
[FRAME]: The picture, including
subjects that do not move
dynamically, is output in high
resolution.