Sony MHC-V72D

MHC-V82D/MHC-V72D.GB.5-000-538-13(1)
52
GB
5 Wait 30 seconds after the last
Party Guest is connected.
“P.CHAIN” stops flashing on the
display of the Party Host and the
BLUETOOTH device reconnects to
the Party Host.
6 Start playback on the connected
BLUETOOTH device.
7 Adjust the volume on the Party
Host.
The volume on the Party Guests will
be adjusted accordingly. If you want
to adjust the volume on a particular
Party Guest, adjust the volume on
that Party Guest.
Note
••
When you watch video on your
BLUETOOTH device during Wireless
Party Chain function, there may be a
delay between the audio and video.
••
You cannot select another system as
the new Party Host while the Wireless
Party Chain is activated.
••
When you use the microphone or play
the guitar on Party Host, the sound will
not be output from Party Guests.
••
Sleep Timer and automatic standby
functions are not available on Party
Guests.
••
For detailed operation on other
systems, refer to the operating
instructions of the systems.
Hint
To add new Party Guests after Wireless
Party Chain has already been established,
touch and hold WIRELESS PARTY CHAIN
on the Party Host, then repeat step 3.
To deactivate the Wireless Party
Chain
Touch WIRELESS PARTY CHAIN on
the Party Host.
Note
When you change the function or turn off
the Party Host, the Wireless Party Chain is
also deactivated.
To make a Party Guest leave the
Wireless Party Chain
Touch WIRELESS PARTY CHAIN on
the Party Guest which want to leave.
Note
When you change the function or turn
off a particular Party Guest, that Party
Guest leaves the Wireless Party Chain
connection.
Synchronization of settings in a
Wireless Party Chain
When a Wireless Party Chain has
been established, the following
settings on the Party Host and Party
Guests are changed:
••
If MEGA BASS and illumination
settings are changed on the Party
Host, the settings on Party Guests
are also changed.
••
DJ Effect and Karaoke settings
such as Vocal Fader and Key
Control are turned off on both
Party Host and Party Guests.
••
Sound field settings return to
defaults on both Party Host and
Party Guests.
••
When the Party Host is turned off,
the Party Guests are also turned
off.