NTSC PAL
Use the controls on the system to perform this operation.
Hint
You can also enjoy the sound of audio/video equipment via the system. (See Listening to music of an external audio device, etc..)
If the audio output level from the system is low when connecting the optional equipment, try adjusting the audio output settings on
the connected equipment. It may improve the audio output level. For details, refer to the operating instructions of your equipment.
Note
Do not connect this system to the TV through the video deck.
When the audio signals input to the HDMI OUT (TV) ARC connector of the system are other than 2-channel Linear PCM signals,
the messages [CODE 01] and [SGNL ERR] appear on the display of the system. (See About messages.)
5-014-121-11(1) Copyright 2020 Sony Corporation
Press
(power) to turn on the system.1.
Touch FUNCTION repeatedly to select [DVD/CD].2.
Hold down MIC ECHO and MEGA BASS for more than 3 seconds.
[NTSC] or [PAL] appears on the display.
3.
To Next Page
Loading...
