Sony MVS-7000X - Page 45

1-39
MVS-8000X/7000X
8. FC-112 board
D802 D803
D203 D307 D306 D305 D304 D303 D302 D301
D501 D502 D1307 D1304 D1306 D1305 D1303 D1302
D801
S601
D804 D1301
Side A (Component Side)
DD206
1
2
3
4
5
6
7
8
9
10
11
13
ABCDE F GHJ KL MN P
< LED >
D802 (B-1) : POWER
Power supply status indication.
Lights in green when all power supply on the board are
normally.
D803 (B-1) : BECON
For future expansion.
D801 (C-1) : STATUS
For future expansion.
D203 (C-1) : +12 V
+12 V power supply status indication.
Lights when the +12 V power is supplied.
If this LED does not light, the fuse may have blown.
D307 (C-1) : +3.3 V
+3.3 V power supply status indication.
Lights when the +3.3 V power is supplied.
D305, D306 (C-1) : +2.5 V-1, -2
+2.5 V power supply status indication.
Lights when the +2.5 V power is supplied.
D304 (C-1) : +1.8 V
+1.8 V power supply status indication.
Lights when the +1.8 V power is supplied.
D303 (D-1) : +1.2 V
+1.2 V power supply status indication.
Lights when the +1.2 V power is supplied.