Need help?Do you have a question about the Sony PCM-7040 and is the answer not in the manual?
General| Quantization | 16-bit linear |
|---|---|
| Type | Digital Audio Recorder |
| Recording Format | PCM |
| Sampling Frequency | 48 kHz, 44.1 kHz, 32 kHz |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | ≥ 90 dB |
| Dynamic Range | >90 dB |
| Total Harmonic Distortion | <0.005% |
| Inputs | Analog XLR, Digital XLR |
| Outputs | Analog XLR, Digital XLR |
| Tape Length | Up to 120 minutes |
| Power Supply | AC 100-240V |
Essential safety guidelines to prevent fire, shock, and damage.
Identification and description of front panel buttons, knobs, and displays.
Procedures for powering the unit and setting initial parameters like clock.
Checks and settings required before starting the recording process.
Step-by-step guide for audio, time code, and subcode recording.
Procedures for playing back tapes and using cuing modes.
Explanation of indicators like ALARM, MUTE, PB CONDITION, etc.
Details on error levels, codes, and their meanings.
To Next Page
