Sony PS-LX120D User Manual

Connections
e The power cord should be connected last of all, first Conventional audio cord connection
making sure that the SYSTEM POWER switch is turned off. Cord plugs and jacks are color coded. The red plugs and
e The cable connectors should be fully inserted into the jacks are for the right channel (R) and white ones for the left
connectors. A loose connection may cause hum and noise. channel (L).
e Keep the speaker cords, connecting cords and power cord
away from the AM loop antenna and the tuner’s antenna
lead-in to avoid possible noise pickup.
@ Speaker cords
Speaker system
For right
TA-AX285 (ap)
] speaker
RA
The TA-AX285 has connectors for two pairs of speaker
systems— system A and system B—which can be
selected individually or simultaneously by means of the
front panel SPEAKERS select buttons.
No sound will be heard if only one of the speaker system
is connected and the SPEAKERS select buttons A and B
are depressed.
© FM antenna
Suplied FM wire antenna
For normal reception.
For higher quality reception.
Qutdoor FM antenna
(75-ohm coaxial cable)

Sony PS-LX120D Specifications

General

Brand	Sony
Model	PS-LX120D
Category	Stereo System
Language	English