Sony PXW-FX9 - Restore Media Error; Execute APR Message

Contents
147
Section Index
U. Error messages and common problems
U1. Restore Media
If on switching on the camera or inserting an XQD card
you see the message “Restore Media” do not worry. This
is the camera performing routine maintenance on the
card to keep the file system tidy and free from corruption.
Always allow the camera to perform the Restore Media
function. It is not an error or fault, just housekeeping.
U2. Execute APR
After switching the camera on you may see a message
saying “Execute APR”. This is not an error or malfunction.
The APR function minimizes the appearance of bright or
dark sensor pixels and minimizes sensor noise.
Cover/cap the lens and press SEL/SET to execute the APR
function.
If you do not perform APR you will be reminded to
perform APR the next time the camera is turned on.
You should perform APR regularly to maintain the best
possible image quality.