Need help?Do you have a question about the Sony PXW-Z280 V5.0 and is the answer not in the manual?
General| Image Stabilization | Optical SteadyShot |
|---|---|
| ND Filter | Clear, 1/4, 1/16, 1/64 |
| Resolution | 4K UHD (3840 x 2160) |
| Lens | 20x optical zoom lens |
| Recording Format | XAVC, MPEG HD, DVCAM |
| Media Type | SxS, SD |
| Viewfinder | 0.39-inch OLED |
| LCD Screen | 3.5-inch LCD (1.56M dots) |
| Audio Input | 2x XLR |
| Recording Resolution | 4K, HD |
| Audio Recording | 24-bit, 48 kHz, 4-channel |
| Video Resolution | UHD 4K (3840 x 2160) |
| Frame Rate | Up to 60 fps |
| Bit Rate | Up to 600 Mbps (XAVC) |
| Audio Format | LPCM |
| Media Type Additional | SDXC |
| Input/Output | HDMI, SDI, USB |
| Weight (Body Only) | 4.4 lbs (2.0 kg) |
| Sensor Type | 3-chip 1/2 type Exmor R CMOS |
Describes live workflow scenarios using C3 Portal, including streaming and intercom.
Details file workflow scenarios using C3 Portal, covering naming, proxy uploads, and FTP.
Explains how to stream content directly to online platforms using RTMP/RTMPS protocols.
Details supported network environments: 4G/LTE USB Modem, Wireless LAN, Wired LAN, Smartphone.
Explains how to configure Network Client Mode settings for C3 Portal or Network RX Station.
Specifies the information needed to prepare an FTP server for file transfers.
Describes how to connect a USB headset for intercom functionality.
Provides a checklist of setup steps required for live streaming.
Provides a checklist of setup steps required for intercom operation.
Provides a checklist of setup steps for camera remote control.
Provides a checklist for setting up file naming using planning metadata.
Provides a checklist of setup steps for automatic proxy file uploads.
Provides a checklist for uploading files to an FTP server.
Provides a checklist for setting up RTMP/RTMPS streaming.
Lists the essential equipment required for wireless solutions, such as USB modems.
Details any necessary assembly procedures for the camcorder or related equipment.
Covers configuration for 4G/LTE USB Modem, Wireless LAN, Wired LAN, and Smartphone connections.
Guides on configuring Network Client Mode presets for C3 Portal or Network RX Station.
Covers tests for 4G/LTE USB Modem, Wireless LAN, Wired LAN, and Smartphone network connections.
Tests communication for C3 Portal and Network RX Station within Network Client Mode.
Details specific camcorder settings required or restricted for live streaming.
Guides on performing a QoS streaming test controlled from the CCM UI.
Lists conditions where intercom function is not available and required settings.
Guides on testing intercom functionality after Network Client Mode is successful.
Explains enabling Camera Control in Network Client Mode settings for remote operation.
Guides on testing camera remote operation by controlling zoom, iris, focus, etc.
Details camcorder settings for file naming using planning metadata, setting Auto Naming to Plan.
Tests downloading planning metadata files and verifying clip name changes.
Configures camcorder settings for automatically uploading proxy files after recording.
Guides on configuring FTP server settings on the camcorder for proxy file uploads.
Tests FTP server communication by checking clip transfer status using the camcorder menu.
Tests proxy file transfer using a web browser by accessing the camcorder's slot page.
Notes that no specific settings are required on the camcorder for FTP upload.
Refers to Section 10.2 for configuring FTP server settings for uploads.
Refers to Section 10.3 for testing FTP server communication.
Details restrictions and configuration for RTMP/RTMPS streaming on the camcorder.
Tests the connection and streaming by setting RTMP/RTMPS to On.
Addresses problems with 4G/LTE USB Modem, Wireless LAN, and Wired LAN connections.
Helps resolve issues with connecting to CCM, authentication, and certificates.
Solves problems like STRM icon not displayed or inability to reach target bitrate.
Addresses issues with disabling zoom/iris control or lens switch problems.
Solves problems related to intercom unavailability or icon display issues.
Helps resolve issues when the clip name is not set correctly or metadata is not loaded.
Addresses issues like 'Waiting' status, file access errors, or certificate errors.
Solves problems with getting proxy/original files or FTP server errors.
Resolves issues with RTMP/RTMPS streaming, like icon display or setting errors.
Details the required file format, name, and structure for FTPS certificates.
Explains the format for RTMPS certificates and installation of individual certificates.
Guides on loading certificates in the specified format for RTMPS.
Describes how to download and update default certificates for RTMPS.
Provides information on installing CA certificates for RTMPS streaming.
Explains the meaning of various status displays in the View Job List screen.
Highlights important notices and warnings related to the product's specifications.
Provides essential security measures to protect the unit and communication.
To Next Page
