Sony RDP-X200iP Specifications

1. Works with iPad, iPhone 4S, iPhone 4, iPhone 3Gs, iPhone 3G, iPhone, iPod® 5th
generation, iPod classic®, iPod nano® 2nd (aluminum), 3rd (video), 4th (video), and 5th
(video camera) generations, and iPod touch® 1st and 2nd generations.
2. Measurements at 4 Ohms, 150 Hz – 10 kHz with a THD of 10%
© 2011 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without
written permission is prohibited. Sony, Clear Phase, and S-MASTER are trademarks of Sony.
Airplay, iPod, iPod classic, iPod nano, iPod touch, and iPhone are trademarks of Apple
Inc. Bluetooth is a trademark of Bluetooth SIG, Inc. All other trademarks are trademarks of
their respective owners. Features and specications are subject to change without notice.
/Updated: January 17, 2012
Input(s)
iPod 30-pin Interface
Power
Input Voltage
DC Out 5 V, Max 1 A
Speaker
Tweeter Size
Approximately 1 inch (2.5 cm) diameter
Woofer Size(s)
Approximately 3 inches (7.6 cm) diameter
Dimensions (Approx.)
Dimensions (Approx.)
Approximately 14 inches x 6 inches x 6 inches (356.0 mm x 168.0 mm x 156.0 mm
(w/h/d))
Weights and Measurements
Weight (Approx.)
Approximately 4lb 8 oz. (2.2 kg)
Accessories
Supplied Accessories
Remote Commander (1)
AC Power Adaptor (1)
AC Power Cord (1)
Audio Connecting Cable (1)
Universal Dock Adaptor for iPhone (1)
Universal Dock Adaptor for iPhone 3G & iPhone 3GS (1)

Sony RDP-X200iP Specifications

General

Product color	Black
Volume control	Digital
Indication light	Yes
Speaker power	20 W
Dimensions (WxDxH)	356 x 168.1 x 155.8 mm
AC input voltage	100 - 240 V
Power source type	AC
Power consumption (typical)	60 W
Impedance	4 Ω
Driver diameter	76 mm
Frequency range	- Hz
RMS rated power	40 W
Audio output channels	2.0 channels
Headphone connectivity	2.5 mm
FM radio	No
Equalizer	-
Apple docking compatibility	iPad, iPhone, iPod

Weight and Dimensions

Depth	155.8 mm
Width	356 mm
Height	168.1 mm
Weight	2200 g