Sony RDP-X500IP Specifications

1. Compatible with iPod touch
®
1st through 4th generation, iPod nano
®
2nd through 6th
generation, iPod classic
®
, iPhone
®
3G, 3GS, 4, and 4S, iPad, and iPad 2.
© 2011 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without
written permission is prohibited. Sony, S-Master, and ClearPhase are trademarks of Sony.
iPod, iPhone, and iPad are trademarks of Apple Inc., registered in the U.S. and other
countries. All other trademarks are trademarks of their respective owners. Features and
specications are subject to change without notice. Non-metric weights and measures are
approximate and may vary. /Updated: May 23, 2012
Digital Audio Input(s)
Works with:
iPhone
®
iPhone 3G
iPhone 3GS
iPhone 4
iiPhone 4S
iPod
®
classic
iPod nano
®
2nd, 3rd (video), 4th (video), 5th (video camera), and 6th generation
iPod touch
®
1st, 2nd, 3rd, and 4th generation
iPad 1st and 2nd generation.
Input(s)
iPod 30-pin Interface
Power
Input Voltage
DC IN 19.5 V
Speaker
Woofer Size(s)
Satellite: Approximately 1 15/16 inches (4.8 cm) diameter
Woofer: Approximately 3 5/8 inches (9.0 cm) diameter
Dimensions (Approx.)
Dimensions (Approx.)
Approximately 15 7/8 inches x 7 inches x 6 3/8 inches (401 mm x 176 mm x 160 mm
(w/h/d))
Weights and Measurements
Weight (Approx.)
Approximately 6 lb 15 oz. (3.15 kg)
Accessories
Supplied Accessories
AC Power Adaptor (1)
AC Power Cord (1)
Remote Commander (1)
CR2025 Lithium battery (1) Pre-installed in the remote commander for trial use.

Sony RDP-X500IP Specifications

Power

dc output voltage	5 V
dc output current max	2.1 A
power requirements	DC IN 19.5 V

Audio

audio power output	15 W + 15 W + 30 W
total harmonic distortion	10%
power output per channel	10 watts
audio in jack	ø 3.5 mm stereo minijack

Speaker Specifications

satellite speaker diameter	4.8 cm
satellite speaker impedance	8Ω
subwoofer diameter	9.0 cm
subwoofer impedance	4Ω

Weight and Dimensions

dimensions	Approx. 401 mm × 176 mm × 160 mm
mass	Approx. 3.15 kg