30
Connecting a PAY-TV/Canal Plus Decoder
p Press M/m to select “PAY-TV/CANAL+,”
then press ENTER.
q Press M/m to select “On,” then press ENTER.
r Press SYSTEM MENU repeatedly to exit the
menu.
To return to the previous step
Press RETURN.
Notes
• When you set “Line3 Input” to “Decoder” in step 5 above, you will not
be able to select “L3” because Line 3 will become a dedicated line for
the decoder.
• If you disconnect the recorder’s mains lead, you will not be able to
view the signals from the connected decoder.
Settings - Channel Setting
Prog. 6
System :
Normal / CATV :
Channel Set :
Station Name :
Pay - TV / CANAL+ :
Audio :
BG
Normal
C24
PQR
On
NICAM
On
Off
To Next Page
Loading...
Need help?
General
