Need help?Do you have a question about the Sony RHT-G900 and is the answer not in the manual?
General| Type | Home Theater System |
|---|---|
| Total Power Output | 1000W |
| HDMI Inputs | 3 |
| HDMI Outputs | 1 |
| Audio Formats Supported | Dolby Digital, DTS |
| Wireless Connectivity | No |
| Digital Audio Input (Optical) | 1 |
| Digital Audio Input (Coaxial) | 1 |
| Analog Audio Input | 1 |
| Subwoofer | Yes |
| Frequency Response | 20 Hz - 20 kHz |
| Outputs | Subwoofer Output |
| Speaker Configuration | 5.1 channel |
Ensures the TV remains stable on the stand to prevent falls and injuries.
Guidelines for safely moving the stand, with or without equipment attached.
Prevents damage to power and connecting cables from pinching hazards.
Prevents children from climbing or playing on the stand to avoid injury.
Avoid placing heated objects or sharp items on the stand to prevent damage.
Precautions for preventing glass breakage and injury from shocks or cracks.
Refer to separate instructions for installing the top glass panel.
Steps to safely secure the TV to the stand to prevent it from falling.
Guide for installing the shelf board on the RHT-G900 model.
Illustrates how to connect audio/video components using HDMI cables.
Details the functions of buttons for operating the stand itself.
Details buttons for controlling connected components via DMPORT.
Explains the benefits of connecting BRAVIA Sync compatible devices.
Steps to enable Control for HDMI for integrated device operation.
Automatic playback activation for Blu-ray, DVD, and game consoles.
Allows switching TV sound between TV speakers and stand speakers.
Limits the maximum volume output to prevent sudden loud sounds.
Enables automatic shutdown of connected components when TV is turned off.
Troubleshoots problems where the HDMI Control function is not working.
Addresses issues where no image appears on the TV screen.
Diagnoses why the System Power Off function may not work.
Explains why volume may decrease when switching audio sources.
Guides on performing a factory reset for the stand.
To Next Page