Sony RM-PP505L User Manual

3
Before you use your
remote
Check that you received the following item
with the remote:
R6 (size-AA) batteries (2)
Inserting batteries into the
remote
Insert two R6 (size-AA) batteries with the +
and – properly oriented in the battery
compartment. When using the remote, point it
at the remote sensor
on the receiver.
Tip
Under normal conditions, the batteries should last for
about 6 months. When the remote no longer operates
the receiver, replace both batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor of the receiver to
direct sunlight or lighting apparatuses. Doing so
may cause a malfunction.
• If you don’t use the remote for an extended period
of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
Table of Contents
Location of Parts and Basic
Remote Operations
Parts description .................................... 4
Table of buttons that you can use to
control each component .................. 9
Advanced Remote Operations
Programming the remote ..................... 10
Learning the commands of your
components ................................... 13
Performing several commands in
sequence automatically
(Macro Play).................................. 14
Selecting the mode of the remote ........ 15
Additional Information
Troubleshooting.....................Back cover
Specifications ........................ Back cover

Sony RM-PP505L Specifications

Power

power requirements	3 V DC with two R6 (size-AA) batteries

Weight and Dimensions

dimensions	210 x 68 x 25 mm
mass	150 g excluding batteries