Sony RM-US106 - Page 5

5
GB
Location of Parts and Basic Remote Operations
SHIFT 4
When the tuner is selected, press repeatedly
to select a memory page for presetting radio
stations or tuning to preset stations.
USE MODE 9
Press to change the category of the buttons.
USE MODE indicator q;
Operating the components
connected to the main
receiver from the 2nd (or 3rd)
zone
CH/PRESET/D.SKIP +/–
*
7
Press repeatedly to select a preset station or
channel. When using a multi-disc changer,
press to skip a disc.
Operation buttons
*
8
The following table describes the function
of the buttons.
* The function of these buttons switches automatically
each time you press the input buttons (3). The
above explanation is intended to serve as an example
only. Therefore, depending on the component, the
above operation may not be possible or may operate
differently than described.
Button(s) Function
N Starts play. (Starts play on the
front side of the cassette.)
n Starts play on the reverse side of
the cassette.
X Pauses play or recording, and
starts recording when the
component is in recording
standby.
x Stops play.
./> Skips tracks.
m/M Fast forwards or rewinds.