⑦
Do not hold Heat-Sink when dis-assembly or assembly it.
7
④
Regardless of Good board or Defective board, always put it on
ESD cushion/sheet slowly.
⑤
Do not stack up.
⑥
Keep vertical position and put in/take out from Box.
Always put into ESD bag then place into Box/Container Box.
2) Caution for Board handling(ESD).
Be sure to observe the following contents
.
①
When take off Rear-Cover, do
not touch to board.
②
Use ESD wrist-strap.
SAFETY NOTES
To Next Page
Loading...
