Help Guide
Wearable Thermo Device Kit/Wearable Thermo Device Sensing Kit/Wearable Thermo Device
RNPK-4/RNPK-4T/RNP-3
Initializing the unit
If you cannot control the unit properly with the “REON POCKET” app, try to initialize the unit.
Note
The initializing deletes the setting information from the unit as follows:
Device registration information of the connected smartphone
Cooling/warming settings
Air volume setting of FAN mode
The saved settings for AUTO MODE, MY MODE, QUICK LAUNCH, etc.
The saved [Preference of temperature] setings for SMART COOL MODE, SMART WARM MODE, and SMART COOL ⇔
WARM MODE
The saved [Switching Temperatures] settings for SMART COOL ⇔ WARM MODE
E-992-100-12(1) Copyright 2023 Sony Group Corporation
On the “REON POCKET” app screen, tap
(Settings icon) － [Initialize Device].
1
Tap [OK].
The unit is initialized. After initialization, the “REON POCKET” app screen becomes the connection screen. If the
LED on the unit is not blinking in blue, press the button on the unit to start connection.
2
To Next Page
Loading...
