EasyManua.ls Logo

Sony SA-VE215 User Manual

Sony SA-VE215
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
AEP Model
UK Model
E Model
Australian Model
Chinese Model
SERVICE MANUAL
SPEAKER SYSTEM
SPECIFICATIONS
The SA-VE215 system consists of one unit
of SA-WMS215 and five units of SS-MS215.
This set is the Speaker section in HT-K170/
K215.
SA-VE215/WMS215/
SS-MS215
Photo: SA-WMS215
Photo: SS-MS215
SS-MS215 Front, center and rear speakers
Speaker system Full range, magnetically
shielded
Speaker units 5 cm cone type
Enclosure type Bass reflex
Rated impedance 8 ohms
Power handling 60 watts
capacity
(Maximum input
power)
Sensitivity level 84 dB (1W, 1m)
Frequency range 150 Hz - 20,000 Hz
Dimensions (w/h/d) Approx. 76 × 100 × 86 mm
including front grille
Mass Approx. 425 g
SA-WMS215 Subwoofer
System Active subwoofer,
Speaker system magnetically shielded
Speaker unit Woofer : 16 cm cone type
Enclosure type Acoustically Loaded Bass Reflex
Continuous RMS 50 W
power output
(8 ohms, 20 - 250 Hz)
Reproduction 32 Hz - 250 Hz
frequency range
High frequency 250 Hz
cut-off frequency
Input
LINE IN (input pin jack)
General
Power requirements 220 - 230 V AC, 50/60 Hz
Power consumptions 45 W
Dimensions (w/h/d) Approx. 240 × 285 × 355 mm
including front panel
Mass Approx. 8 kg
Design and specifications are subject to change without
notice
Ver 1.1 2003. 05
Sony Corporation
Home Audio Company
Published by Sony Engineering Corporation
9-929-500-12
2003E16-1
© 2003.05
Question and Answer IconNeed help?

Do you have a question about the Sony SA-VE215 and is the answer not in the manual?

Sony SA-VE215 Specifications

General IconGeneral
BrandSony
ModelSA-VE215
CategorySpeaker System
LanguageEnglish

Summary

SPECIFICATIONS

SS-MS215 Speaker Specifications

Detailed specifications for the SS-MS215 front, center, and rear speakers.

SA-WMS215 Subwoofer Specifications

Detailed specifications for the SA-WMS215 subwoofer, including power and frequency range.

SAFETY-RELATED COMPONENT WARNINGS

SECTION 1 DIAGRAMS AND NOTES

Printed Wiring Board and Schematic Notes

Explains notations for printed wiring boards and schematic diagrams used in the manual.

IC Block Diagram

Illustrates the block diagram for integrated circuits (IC302 UPC1237HA).

Circuit Boards Location

Shows the physical layout and location of various circuit boards within the SA-WMS215.

SA-WMS215 Schematic Diagram

Provides the detailed schematic diagram for the SA-WMS215 subwoofer.

SA-WMS215 Printed Wiring Board

Displays the printed wiring board layout for the SA-WMS215 subwoofer.

SECTION 2 EXPLODED VIEWS

SA-WMS215 Exploded View Part 1

Illustrates the exploded view of the SA-WMS215 subwoofer, showing component assembly.

SA-WMS215 Exploded View Part 2

Continues the exploded view of the SA-WMS215 subwoofer, detailing more parts and their arrangement.

SS-MS215 Exploded View

Presents the exploded view of the SS-MS215 speaker, identifying individual components.

SECTION 3 ELECTRICAL PARTS LIST: CONTROL, LED, MAIN

Control Board Electrical Parts

Lists electrical components for the Control board.

LED Board Electrical Parts

Lists electrical components for the LED board.

Main Board Electrical Parts

Lists electrical components for the Main board.

SECTION 3 ELECTRICAL PARTS LIST: POWER BOARDS

Power IC Board Electrical Parts

Lists electrical components for the Power IC board.

Power Supply Board Electrical Parts

Lists electrical components for the Power Supply board.

Power Switch Board Electrical Parts

Lists electrical components for the Power Switch board.

REVISION HISTORY

Related product manuals