To Next PageTo Next Page
Need help?Do you have a question about the Sony SA-WMSP76 and is the answer not in the manual?
General| Type | Active Subwoofer |
|---|---|
| Amplifier Power | 100 Watts |
| Frequency Response | 28 Hz - 200 Hz |
| Inputs | Line Level |
| Driver Size | 12" |
Section for recording product serial and model numbers for dealer reference.
Instructions to prevent fire and electric shock hazards from moisture and ventilation blockage.
Guidelines for safely disposing of used batteries as chemical waste.
Details on connecting various audio and video components to the receiver.
Lists and describes the necessary optional connection cords for setup.
Step-by-step guide for connecting DVD players or satellite tuners via digital audio.
Diagrams illustrating how to connect video components like DVD players and TV monitors.
Instructions for connecting audio components using analog audio jacks.
How to connect the AM loop antenna and FM wire antenna for radio reception.
Guide to connecting a 5.1 channel speaker system to the receiver.
Instructions for connecting the power cord and performing the initial receiver setup.
How to adjust speaker distances and placement in the setup menu.
Steps for setting up and adjusting the subwoofer volume and level.
Using the test tone to adjust speaker levels and balance for optimal sound.
How to select and operate different audio/video components connected to the receiver.
Procedures for listening to FM/AM broadcasts, including tuning and presets.
How to change and adjust the information displayed on the receiver screen.
Explains the meaning of various indicators and symbols shown on the receiver display.
How to output sound from front speakers and subwoofer only.
Options for enjoying higher fidelity sound, including Auto Format Direct.
How the receiver automatically detects and decodes various audio signal types.
Guide to selecting pre-programmed sound fields for movies and music.
How to switch the audio input mode for digital components.
Adjusting sound field parameters using the LEVEL menu.
Fine-tuning the balance, level, and tone of individual speakers.
Procedure to reset all sound fields to their initial factory settings.
Using the CUSTOMIZE menu for various receiver settings.
Assigning custom names to inputs and preset radio stations for easier identification.
Setting the receiver to automatically turn off after a specified time.
Steps for recording audio from sources to cassette tapes or MiniDiscs.
Instructions for recording video content from sources like VCRs or DVDs.
Overview of the remote control buttons and their primary functions.
Guide on how to properly insert batteries into the remote commander.
How to reassign input buttons on the remote to match system components.
Important safety guidelines regarding power sources, heat, and placement.
How to address color irregularities on nearby TV screens caused by speakers.
Instructions for cleaning the receiver cabinet, panel, and controls.
Steps to resolve issues where no sound or very low sound is produced.
Solutions for unbalanced audio, hum, noise, or incorrect surround sound.
How to obtain the correct surround effect and troubleshoot related problems.
Solutions for issues like failed recordings, poor FM reception, or tuning problems.
Troubleshooting steps for non-functional remotes and error messages displayed.
How clearing the receiver's memory can resolve persistent problems.
Detailed specifications for the receiver's power output and harmonic distortion.
Technical details for amplifier, input/output, tuner sections, and general dimensions.
Specifications for the front, center, and surround speakers, including dimensions.
Technical details for the subwoofer, including RMS output and dimensions.
A list of all accessories included with the receiver package.
Guide to locating and referencing buttons on the main unit via an index.
