18
Precautions (continued)
• Never disassemble or modify the network adaptor.
• Do not put heavy objects on the network adaptor.
• Do not touch the metal parts or insert foreign objects into the
connectors or buzzer port of the network adaptor.
• When you do not intend to use the network adaptor for an
extended period of time, disconnect the power plug for the
PlayStation®2 console from the electrical outlet and the telephone
cord from the wall jack.
• When disconnecting the power plug from an electrical outlet, pull
it out by grasping the plug. Never pull the cord itself.
•
Do not connect any unauthorized internal peripheral to the
network adaptor.
• Do not place any rubber or vinyl materials on the exterior of the
network adaptor for an extended period of time. Doing so may
damage the plastic surface.
Connecting to a telephone line
Do not connect a cord of any type other than a home-use phone
cord to the LINE connector.
If you connect a telephone cord or network cable of a type other
than that specified to the line connector, too much electrical current
may pass through the connector, causing a malfunction, excessive
heat or fire in the connector. Never connect phone cords of the
following types (especially a home network or business phone
cord) to the line connector:
• The jack of an ISDN (digital) compatible public phone
• PBX phone lines
• Cellular phone or car phone
• Telephone lines for home networks or business phones
To Next Page