Sony SLT-A37 - Information Display; Object Tracking

111
Adjusting the focus
Shooting (Advanced operations)
MENU button t 2 t [AF Illuminator] t Select the desired
setting
• Since the camera uses the built-in flash as an AF illuminator, press the
button to open the flash.
Notes
• AF illuminator does not operate when [Autofocus Mode] is set to [Continuous AF]
or the subject is moving in [Automatic AF]. (The or indicator lights.)
• The AF illuminator may not operate with focal lengths of 300 mm or longer.
• When an external flash (sold separately) that is equipped with an AF illuminator is
attached, the AF illuminator of the external flash is used. Push the built-in flash
down.
• AF illuminator does not operate when [Smile Shutter] is set to [On].
Keeps the focusing on a moving subject while tracking it. The Object
Tracking function is set to [On] in the default setting.
Notes
• Tracking may be difficult in the following situations:
Object Tracking
1 Press the center of the control button on the recording
information display.
A target frame appears.
• To turn off the Object Tracking function, press the Fn button, then set it to
[Off].
2 Align the target frame with the
subject to be tracked, and press
the center of the control button.
The camera starts tracking the subject.
• To cancel this tracking feature, press
the center again.
Target frame
3 Press the shutter button to shoot the subject.