Sony SLV-N51 Service Manual (English)

Other manuals for Sony SLV-N51

Service Manual2 pages

Operating Instructions60 pages

Documentation Update1 page

Questions and Answers:

A
Alexis LeblancAug 20, 2025
How to fix a Sony SLV-N51 VCR when a TV program does not appear on the TV screen?
- C
  cynthiaadkinsAug 20, 2025
  To resolve a situation where a TV program isn't showing on the TV screen when using your Sony VCR, first ensure that your TV is set to the correct channel for the VCR or, if you're using a monitor, that it's set to video input. If this doesn't work, select the appropriate source using the INPUT SELECT or CH +/- buttons. When recording TV programs, choose a channel number; for recording from other equipment, select 'L1' or 'L2'.
W
walkerkarenAug 22, 2025
Why is the picture not clear on my Sony VCR and how to fix it?
- D
  Denise MarksAug 22, 2025
  If the picture on your Sony VCR is unclear, it might be due to dirty video heads. Clean them using a Sony T-25CLD or T-25CLDR video head cleaning cassette. If these aren't available, get the heads cleaned at your nearest Sony dealer for a fee. Avoid liquid-type cleaning cassettes, as they can damage the video heads. You can also try adjusting the tracking with the TRACKING +/- buttons. If problems persist, the video heads may need replacement; consult your local Sony dealer.
A
Andrew VillaAug 25, 2025
What to do if the Sony SLV-N51 VCR remote commander does not function?
- J
  John WillisAug 25, 2025
  If your Sony VCR's remote commander isn't working, first, make sure you're pointing it directly at the remote sensor on the VCR. If that doesn't work, replace all the batteries in the remote commander with new ones, especially if the old ones are weak. Also, ensure that the TV/VIDEO switch is correctly set.
T
Tracey BatesAug 26, 2025
What to do if the playback picture does not appear on the TV screen of my Sony SLV-N51?
- S
  sharonwestAug 27, 2025
  If the playback picture from your Sony VCR doesn't appear on the TV screen, ensure your TV is set to the correct channel for the VCR. If you're using a monitor, set it to video input.
B
Barry SanchezAug 28, 2025
Why does the timer not operate on my Sony SLV-N51 VCR?
- A
  Amy LittleAug 28, 2025
  If your Sony VCR's timer isn't working, first check that the clock is set correctly. Also, ensure that a tape has been inserted and that its safety tab hasn't been removed. Verify that the tape isn't at its end and a program has been set for timer recording. Confirm that your timer settings are past the current time and that the cable box is turned on. Note that the clock will stop if the VCR is disconnected from the wall outlet for more than one minute; if this happens, reset the clock and timer. As a last resort, turn the power off and unplug the AC power cord.
S
Samantha WilliamsAug 29, 2025
What to do if the power is turned on but the Sony SLV-N51 VCR does not operate?
- G
  Gloria BanksAug 29, 2025
  If your Sony VCR's power is on but the VCR isn't operating, it might be due to moisture condensation. Turn the power off, unplug the AC power cord, and let the VCR dry for over three hours.
C
Cathy PrattAug 31, 2025
Why is the tape ejected when I press REC on my Sony SLV-N51?
- T
  Tammy GomezAug 31, 2025
  If your Sony VCR is ejecting tapes when you press REC, it's likely because the safety tab has been removed from the tape. Check the tape and ensure the safety tab is still in place.
B
Brandon GomezSep 2, 2025
What to do if nothing happens when I press REC on my Sony SLV-N51 VCR?
- K
  Kyle SotoSep 2, 2025
  If nothing happens when you press REC on your Sony VCR, ensure the tape isn't at its end.
B
Brian YoungSep 4, 2025
What to do if a tape cannot be inserted into my Sony SLV-N51 VCR?
- J
  justin48Sep 4, 2025
  If a tape cannot be inserted into your Sony VCR, first check to make sure that there isn’t already a tape in the tape compartment.
J
Jacob HoldenSep 6, 2025
Why does the tape start playing as soon as it is inserted in my Sony SLV-N51 VCR?
- D
  Derek JonesSep 6, 2025
  If the tape starts playing as soon as it's inserted into your Sony VCR, it means the safety tab has been removed from the tape. To record on this tape, cover the tab hole.

Sony SLV-N51 Specifications

General

Type	VCR
Video Format	VHS
Recording Speed	SP, LP, EP
Playback Speed	SP, LP, EP
Remote Control	Yes
Tape Type	VHS
Heads	4
Clock	Yes
Timer Recording	Yes
Tuner	NTSC
Inputs	Composite video/audio, RF
Outputs	Composite video/audio, RF