Sony SmartWatch 2 SW2 - User Manual

Startup guide
SmartWatch 2
SW2
Sony Mobile Communications AB
SE-221 88 Lund, Sweden
www.sonymobile.com
Basics
Charging
Before using your SmartWatch 2 for the first
time, you need to charge it for approximately 30
minutes. Sony chargers/USB cables are
recommended.
To charge your SmartWatch 2
1
Plug one end of the USB cable into the
charger or into the USB port of a computer.
2
Plug the other end of the cable into the Micro
USB port of your SmartWatch 2.
A charger may not be included at purchase in
all markets.
Overview
1
7
8
2
3
6
4
5
1. Light sensor
2. Power key
3. Actions key
4. Home key
5. Back key
6. Touchscreen
7. NFC detection area
8. Port for charger/USB
cable
Turning on and off
To turn on your SmartWatch 2
•
Press and hold down the power key
until
the display turns on.
To turn off your SmartWatch 2
•
When the display is active, press and hold
down the power key until the display
turns off.
Setting up your
SmartWatch 2
The quickest way to get started with your
SmartWatch 2 is by connecting it to your
device using NFC. If your device does not
support NFC, you can connect manually.
Setting up using NFC
To save data costs, make sure that your
device is connected to a Wi-Fi
®
network.
1
Device: Make sure that the NFC function is
turned on and that the screen is active and
unlocked.
2
SmartWatch 2: Turn on your SmartWatch
2.
3
If the Smart Connect application is not pre-
installed on your device, place the device
over the back of your SmartWatch 2 so that
the NFC detection area of each device
touches each other. Then follow the
instructions that appear on the device's
July 4, 2013 16:32:44
BC
1276-5962.2

Summary

Basics

Charging

Before first use, charge the SmartWatch 2 for approximately 30 minutes. Sony chargers/USB cables are recommended.

Turning on and off

Press and hold the power key to turn the SmartWatch 2 on or off. The display indicates the status.

Overview

Device Components

Identifies key components of the SmartWatch 2, including the light sensor, power, actions, and home keys, and the USB port.

Setting up your SmartWatch 2

Setting up using NFC

Connect your SmartWatch 2 to your device quickly using NFC. Ensure NFC is enabled and devices touch.

Setting up manually

Connect your SmartWatch 2 using Bluetooth if NFC is not supported. Ensure Bluetooth is enabled on your device.

Getting to know your SmartWatch 2

Installing extra applications

Optimize functionality by installing extra applications via the Smart Connect app. Use the App recommender on the watch.

Support on the web

Visit www.sonymobile.com/support for troubleshooting, user guides, and further assistance with your SmartWatch 2.

Sony SmartWatch 2 SW2 Specifications

General

Brand	Sony
Model	SmartWatch 2 SW2
Category	Watch
Language	English