Need help?Do you have a question about the Sony SRG-300H and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| Wi-Fi | No |
| PTZ control | Yes |
| Placement supported | Indoor & outdoor |
| Light exposure modes | Auto, Manual, Shutter priority AE |
| Connectivity technology | Wired |
| Pan range | -170 - 170 ° |
| Form factor | Dome |
| Mounting type | Desk/Ceiling |
| Product color | Black |
| LED indicators | Power, Stand-by |
| Pan speed (max) | 100 °/sec |
| Tilt angle range | -20 - 90 ° |
| Tilt speed (max) | 90 °/sec |
| Total megapixels | 2.1 MP |
| Maximum resolution | 1920 x 1080 pixels |
| Supported video modes | 720p, 1080i, 1080p |
| Supported graphics resolutions | 1280 x 720 (HD 720), 1920 x 1080 (HD 1080) |
| Sensor type | CMOS |
| Sync system | Internal |
| Digital zoom | 12 x |
| Optical zoom | 30 x |
| White balance | Indoor, ATW, Auto, Manual, Outdoor |
| Focus adjustment | Auto/Manual |
| Focal length range | 4.3 - 129 mm |
| Optical sensor size | 1/2.8 \ |
| Camera shutter speed | 1 - 1/10000 s |
| Minimum illumination | 1.4 lx |
| Number of camera presets | 16 |
| Signal-to-Noise Ratio (SNR) | 50 dB |
| Fastest camera shutter speed | 1/10000 s |
| Slowest camera shutter speed | 1 s |
| Maximum working distance (tele) | 1200 mm |
| Minimum working distance (wide) | 10 mm |
| Maximum aperture number | 4.7 |
| Interface | RS-232C |
| Ethernet LAN (RJ-45) ports | 1 |
| DC input voltage | 12 V |
| DC output voltage | 12 |
| Power source type | DC |
| Power consumption (typical) | 16.8 W |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Cables included | AC |
| Harmonized System (HS) code | 85258900 |
Weight and Dimensions| Depth | 163 mm |
|---|---|
| Width | 157 mm |
| Height | 164 mm |
| Weight | 1400 g |
Details the camera's sensor, zoom, dynamic range, and interface capabilities.
Lists and illustrates the camera and its essential supplied accessories.
Explains how to operate the camera from a short distance using the infrared remote.
Details operating the camera using the RM-IP10 IP remote controller with joystick.
Identifies and describes physical parts, switches, and connectors on the camera unit.
Details the buttons and functions of the supplied infrared remote commander.
Explains how to read and navigate the camera's on-screen menus for settings.
Covers exposure, white balance, and picture quality adjustments.
Details pan/tilt/zoom controls, system options, and status display.
Covers powering on, basic pan/tilt, and zoom operations.
Explains focusing, shooting techniques, and storing camera presets.
Provides instructions for mounting the camera on a desk, tripod, or using M3 screw holes.
Details power, computer, remote controller, and monitor connections.
Lists common issues, their causes, solutions, and status messages.
Provides detailed menu configurations, technical specs, pin assignments, and software license.
To Next Page
