Need help?Do you have a question about the Sony SRS-A60 and is the answer not in the manual?
General| Configuration | 2.0 |
|---|---|
| Power Output | 5W |
| Connectivity | Wired |
| Input | 3.5mm audio jack |
| Power Supply | AC adapter |
Details power output (4W+4W) and input impedance (1.7 kΩ) for the amplifier section.
Covers speaker system type (full-range, bass reflex), nominal impedance (4 Ω), and rated input power (4 W).
Specifies power requirements (DC 12V batteries, DC 9V adapter) and battery life estimates.
Provides the physical dimensions (117x227x130 mm) and weight of the left and right speakers.
Lists the AC power adapter and notes on design changes and EEC conformity for interference suppression.
Explains how to connect the system to house current using the AC power adapter or batteries.
Details connecting the left speaker to source equipment and optional accessories for specific jacks.
Guides on operating the system with the built-in amplifier or bypassing it for external volume control.
Illustrates the component placement and layout of the main amplifier board, including semiconductor reference numbers.
Provides the detailed circuit diagram for the amplifier board, including component values and connections.
Shows the physical breakdown of the speaker system components with reference numbers for assembly.
Lists part numbers, descriptions, and remarks for mechanical and speaker components.
Lists electrical components such as diodes, ICs, transistors, capacitors, and resistors with their specifications.
Details variable resistors for Bass/Volume controls and the push-type power switch (S1).
Lists AC adapters, conversion plugs, and instruction manuals specific to various regions and models.
To Next Page
