Sony SRS-XB31 Help Guide

Help Guide
Wireless Speaker
SRS-XB31
Unable to pair the speaker with a BLUETOOTH device
Place the speaker and the BLUETOOTH device within 1 m (3 ft) of each other.
To use the Speaker Add function or Wireless Party Chain function, pair with the speaker in which the
(BLUETOOTH) indicator flashes in blue.
If the
(BLUETOOTH) indicator is not flashing quickly in blue, press and hold the (power) button/ PAIRING
button until you hear a voice guidance and the
(BLUETOOTH) indicator begins to flash quickly in blue.
Once the speaker is initialized, an iPhone/iPod touch may not be able to connect to the speaker. In this case, delete
pairing information on the iPhone/iPod touch, then pair them again.
Check that the BLUETOOTH device is turned on and the BLUETOOTH function is activated on the device.
If the speaker is not displayed on the BLUETOOTH device, turn off the device, and then turn on the device again. It
may improve symptoms.
Related Topic
Pairing and connecting with BLUETOOTH devices
About the indicators
4-735-510-11(1) Copyright 2018 Sony Corporation
84

Sony SRS-XB31 Specifications

General

Driver diameter	48 mm
Number of drivers	2
Number of speakers	1
Audio output channels	2.0 channels
Frequency range	20 - 20000 Hz
RMS rated power	- W
AUX in	Yes
Bluetooth range	30 m
Bluetooth version	4.2
Bluetooth profiles	A2DP, AVRCP, HFP, HSP, SPP
USB connector type	Micro-USB, USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Product type	Stereo portable speaker
Product color	Yellow
Product design	Soundbar
Volume control	Digital
Illumination LED	No
International Protection (IP) code	IP67
Recommended usage	Universal
Cables included	Micro-USB
Power source type	Battery
Battery life (max)	24 h

Weight and Dimensions

Depth	81 mm
Width	231 mm
Height	87 mm
Weight	890 g