What to do if my Sony Projector has no picture?
If the Sony Projector displays no picture, first ensure all cables are properly connected. Then, verify that the INPUT SELECT radio button in the SCREEN CONTROL window is correctly selected. Also, make sure that the [OFF] button of [MUTING] in the SCREEN CONTROL window is clicked. Finally, ensure the ambient temperature is within the operating range of 5°C to 35°C.
How to fix color balance on Sony SRX-T423 Projector?
If the color balance on your Sony Projector is incorrect, ensure that the [Signal Mode] of [Input Source] in the PICTURE CONTROL window is set correctly.
What to do if the “Control Function Menu” window does not appear on Sony SRX-T423 Projector?
If the “Control Function Menu” window does not appear on your Sony Projector, verify that the connection between the projector and the computer is properly established.
Why does a line appear in the center of a projected 4K image on my Sony Projector?
If a line appears in the center of a projected 4K image from your Sony Projector, verify that the input signal is suitable to be projected as a 4K image.
Observe safety precautions, use with specified voltage, and avoid hazardous locations.
Avoid liquids, dust, and extreme temperatures; do not block vents or open the unit.
How to access and navigate the SRX Controller's main adjustment and setting windows.
Adjusting input source, signal mode, and picture quality settings in the PICTURE CONTROL window.
Adjusting color settings, color space, temperature, and frame parameters in the COLOR/FRAME window.
Configuring installation settings, lens control, image flip, and display modes in the INSTALLATION window.
Guide to diagnosing and resolving common projector and SRX Controller problems.
Explanation of error and information messages displayed by the projector and SRX Controller.
To Next Page
General
