Sony SS-CN700ED - Specifications

HOME THEATER SPEAKER SYSTEM
SA-VF700ED
US Model
Canadian Model
AEP Model
UK Model
SPECIFICATIONS
SA-VF700ED is front speaker system in SA-VS700ED.
9-961-024-01
2003G02-1
© 2003.07
Ver 1.0 2003.07
Sony Corporation
Home Audio Company
Published by Sony Engineering Corporation
SERVICE MANUAL
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 3 ohms loads both subwoofer driven, from 20 - 200 Hz; rated 250
watts minimum RMS power, with no more than 0.8% total harmonic
distortion from 250 milliwatts to rated output.
SA-VF700ED
Speaker system 2 way and built-in subwoofer
Speaker units Subwoofer: 11 cm (4
3
/
8
in.), cone type
Woofer: 8 cm (3
1
/
4
in.), cone type
Tweeter: 2.5 cm (1 in.), dome type
Enclosure type Bass reflex
Rated impedance 8 ohms
Power handling capacity
Maximum input power: 170 watts
Sensitivity level 88 dB (1 W, 1 m)
Frequency range 20 Hz - 70,000 Hz
Inputs
LINE IN: input pin jack
SPEAKER IN: speaker cord
General
Power requirements US, CND model:120 V AC, 60 Hz
AEP, UK model : 220 -230 V AC, 50/60 Hz
Power consumptions 250 W
1 W (standby mode)
Dimensions (w/h/d) Approx. 300 x 1,200 x 300 mm
(11
7
/
8
x 47
1
/
4
x 11
7
/
8
in.)
Mass AMP SIDE: Approx. 16.7 kg
(36 lb 13.07 oz)
NON AMP SIDE: Approx. 15.0 kg
(33 lb 1.11 oz)
Supplied accessories
Audio connecting cord, 5 m (16 ft
1
/
2
in.) (1)
Subwoofer connecting cord, 5m (16 ft
1
/
2
in.) (1)
Speaker connecting cords, 5 m (16 ft
1
/
2
in.) (2)
Design and specifications are subject to change without notice.