Ver. 1.3
7
SS-SHAKE10/SHAKE30/SSSHAKEX10/SSSHAKEX30/SSSHAKEX70
SECTION 2
EXPLODED VIEWS
The components identifi ed by mark
9
con-
tain confi dential information.
Strictly follow the instructions whenever the
components are repaired and/or replaced.
Les composants identifi és par la marque
9
contiennent des informations confi den-
tielles.
Suivre scrupuleusement les instructions
chaque fois qu’un composant est rem-
placé et / ou réparé.
2-1. SS-SHAKE10/SSSHAKEX10
1 4-874-614-12 SCREW (1) (3.5X14), TAPPING
2 4-558-070-01 CORNER PROTECTOR
3 4-176-619-01 FOOT, RUBBER
4 4-874-614-02 SCREW (1) (3.5X14), TAPPING
5 1-826-143-91 LOUDSPEAKER (2.5CM)
6 A-2184-904-A PANEL ASSY, FRONT
7 4-238-407-12 SCREW (1) (4X20), +BV TAPPING
8 1-002-856-11 LOUDSPEAKER (20CM)
9 4-558-820-01 + FLAT TAPPING SCREW - ED BK
10 A-2183-270-A SPK PARTY GB BOARD, COMPLETE
11 4-690-847-02 BRACKET, PARTY L
11 4-690-849-02 BRACKET, PARTY R
12 4-690-850-01 LENS, PARTY
13 4-690-851-02 COVER, PARTY L
13 4-690-852-02 COVER, PARTY R
#1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
#2 7-685-647-79 SCREW +BVTP 3X10 TYPE2 N-S
ns not supplied
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
The components identified by mark
0
or dotted line with mark
0
are critical for
safety.
Replace only with part number specifi ed.
Les composants identifi és par une marque
0
sont critiques pour la sécurité.
Ne les remplacer que par une pièce por-
tant le numéro spécifi é.
Note:
• -XX and -X mean standardized parts, so
they may have some diff erence from the
original one.
• Items marked “
*
” are not stocked since they
are seldom required for routine service.
Some delay should be anticipated when
ordering these items.
• Abbreviation
AR : Argentina model
AUS : Australian model
CND : Canadian model
E4 : African model
E12 : 220 – 240 V AC area in E model
EA : Saudi Arabia model
LA9 : Latin-American model
MY : Malaysia model
RU : Russian model
TH : Thai model
ns
ns
ns
ns
SPK LED board
(ns)
#1
#2
#1
ns
#1
1
1
2
2
2
9
9
11
12
13
10
2
3
3
6
7
8
4
5
3
3
Note 1: This diagram is for R channel speaker.
The mechanical position of L channel is reversed.
Note 2:
LOUDSPEAKER (20CM) for this set has been changed in
the midway of production. LOUDSPEAKER (20CM) for L
channel and R channel in this set is synchronized. When
any of the loudspeaker replacement is needed, check the
part number and order the same part for both channels.
SYSSET
2019/10/3100:01:58(GMT+09:00)