EasyManua.ls Logo

Sony SS-SR3000P - User Manual

Sony SS-SR3000P
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SS-SR3000 4-460-835-11(1) GBFRES
+
Speaker System
SS-SR3000
4-460-835-11(1)
© 2013 Sony Corporation Printed in Malaysia
Amplifier
Amplificateur
Amplificador
Standard Connection/Raccordement standard/
Conexión normal
Foot pads
Tampons de pieds
Almohadillas para las patas
For customers in the United States
Owner’s Record
The model and serial numbers are located on the rear
of the unit. Record these numbers in the space provided
below. Refer to them whenever you call upon your Sony
dealer regarding this product.
Model No.
Serial No.
Connection
• Beforeconnecting,turnofftheamplifiertoavoid
damaging the speaker system.
• Thisspeakersystemisdrivenbestbyanamplifier
or receiver rated as per the wattage indicated in the
specification section.
Note
Avoid driving the speaker system continuously with a
wattage exceeding the maximum input power of this
speaker system.
Precautions
• Donotattempttoopentheenclosureorremove
speaker units. There are no user-serviceable parts
inside.
• Keeprecordedtapes,watches,andpersonalcredit
cards using magnetic coding away from the speaker
system.
• Periodicallywipethecabinetwithasoftcloth.Do
notuseanytypeofscouringpowder,abrasivepador
solvent.
Speaker Placement
Pleasenotethatroomacousticscanoftenproducelarge
difference in the sound for small changes in speaker
placement.
• Setupyourspeakersystemonahard,flatplace.
• Placethespeakersystemagainstahardwallwith
its back about 10 cm (4 in) away from a wall. The
proportion of bass increases as you move a speaker
closertointersectingroomsurfaces(wallandwall,
etc.).
Attaching the foot pads
Besuretoattachthesuppliedfootpadstothebottomof
the speaker to stabilize the speaker and prevent it from
slipping.
Specifications
Speaker system Full range
Speakerunits 70mm(23/4in),conetype
Enclosuretype Bassreflex
Rated impedance 8 ohms
Powerhandlingcapacity Maximuminputpower:
100 watts
Sensitivitylevel 85dB(1W,1m)
Frequencyrange 150Hz-20,000Hz
Dimensions(w/h/d) Approx.110mm×170mm×
111mm(43/8in×63/4in×
4 3/8 in) including front grille
Mass Approx.0.9kg(1lb16oz)
Supplied accessories Speaker cord (1)
Foot pads (4)
Designandspecificationsaresubjecttochangewithout
notice.
English
Question and Answer IconNeed help?

Do you have a question about the Sony SS-SR3000P and is the answer not in the manual?

Sony SS-SR3000P Specifications

General IconGeneral
BrandSony
ModelSS-SR3000P
CategorySpeaker System
LanguageEnglish

Related product manuals