Sony SS-RT3 - User Manual

SERVICE MANUAL
Sony Corporation
Published by Sony EMCS (Malaysia) PG Tec
SS-RT3/SRT3
SPECIFICATIONS
SPEAKER SYSTEM
9-890-681-01
2016C81-1
©
2016.03
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Ver. 1.0 2016.03
• SS-RT3 is Bar speaker in HT-RT3.
• SS-SRT3 is surround speaker in HT-RT3.
• All the units included in the HT-RT3 (SA-WRT3, SS-RT3/SRT3,
remote control) are required to confi rm the operation of SS-RT3/
SRT3. Check in advance that you have all the units.
Photo: SS-SRT3
Photo: SS-RT3
Bar Speaker (SS-RT3)
Front L/Front R/Center speaker section
Speaker system
Full range speaker system, Bass refl ex
Speaker
40 mm (1
5
/
8
in) × 100 mm (4 in) cone type × 3
Dimensions (w/h/d) (approx.)
900 mm × 52 mm × 70 mm
(35
1
/
2
in × 2
1
/
8
in × 2
7
/
8
in)
Mass (approx.)
2.1 kg (4 lb 11 oz)
Surround Speakers (SS-SRT3)
Speaker system
Full range speaker system, Bass refl ex
Speaker
65 mm (2
5
/
8
in) cone type
Dimensions (w/h/d) (approx.)
80 mm × 191 mm × 70 mm
(3
1
/
4
in × 7
5
/
8
in × 2
7
/
8
in)
(projecting parts not included)
Mass (approx.)
0.75 kg (1 lb 11 oz)
Design and specifi cations are subject to change without notice.

Summary

SPECIFICATIONS

Bar Speaker (SS-RT3) Specifications

Details specifications for the SS-RT3 bar speaker, including system, speaker type, dimensions, and mass.

Surround Speakers (SS-SRT3) Specifications

Details specifications for the SS-SRT3 surround speakers, including system, speaker type, dimensions, and mass.

EXPLODED VIEW

SS-RT3 Exploded View and Parts

Provides an exploded view diagram and parts list for the SS-RT3 bar speaker assembly.

SS-SRT3 Exploded View and Parts

Provides an exploded view diagram and parts list for the SS-SRT3 surround speaker assembly.

REVISION HISTORY

Sony SS-RT3 Specifications

General

Connectivity	Wired
Impedance	6 Ohms
Tweeter	1 inch
Components	1 tweeter, 1 woofer
Type	Floorstanding Speaker