— 2 —
Output MD/VIDEO 1 OUT (phono jacks): voltage
450/250mV, impedance 1kΩ
PHONES (stereo phone jack): accepts
headphones of 8Ω or more.
FRONT SPEAKER:
accepts impedance of 6 to 16Ω
CENTER SPEAKER:
accepts impedance of 8 to 16Ω
REAR SPEAKER:
accepts impedance of 8 to 16Ω
SUPER WOOFER:
Voltage 1V, impedance 1kΩ
Video section
Inputs AV INPUT VIDEO (phone jack): 1Vp-p, 75Ω
Outputs MONITOR OUT (phone jack): 1Vp-p, 75Ω
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
3 band type model 87.5 – 108.0MHz (50kHz step)
4 band type model 65.0 – 74.0MHz (10kHz step)
87.5 – 108.0MHz (50kHz step)
Aerial FM lead aerial
Aerial terminals 75Ω unbalanced
Intermediate frequency 10.7MHz
UKV tuner section (4 band type model only)
Tuning range 65.0 – 74.0MHz (10kHz step)
Polar Stereo
AM tuner section
Tuning range
Australian model: 531 – 1,602kHz (with the AM tuning interval
set at 9kHz)
530 – 1,710kHz (with the AM tuning interval
set at 10kHz)
Other models: MW: 531 – 1,602kHz (with the MW tuning
interval set at 9kHz)
530 – 1,710kHz (with the MW tuning interval
set at 10kHz)
SW: 5.95 – 17.90MHz (with the SW tuning
interval set at 5kHz)
LW: 153 – 279kHz (with the interval set at
3kHz)
Intermediate frequency 450kHz
Antenna AM loop antenna External antenna terminal
General
Power requirements
Australian models: 240V AC, 50/60Hz
AEP, UK, East European, CIS models:
230V AC, 50/60Hz
Other models: 120V or 220V or 230 – 240, 50/60Hz
Adjustable with voltage selector
Power consumption 270W (AEP, UK, East European, CIS models)
300W (Other models)
Dimensions (w/h/d) Approx. 288 × 205 × 375mm
Mass Approx. 8.8kg
Supplied accessories: AM loop antenna (1)
Remote RM-SR77 (1)
Size AA (R6) batteries (2)
FM lead antenna (1)
Speaker cords (5)
Front speaker pads (8)
Design and specifications are subject to change without notice.
To Next Page
Loading...
