8 (GB)
4
Secure the TV and the TV Stand
with the two anchor attachments.
Be sure to tighten the attachments with a screwdriver.
• If the two anchor attachments are not used to secure the
TV, it may fall and cause injury.
• When using an electric screwdriver, set the torque setting
to approximately 1.5 N·m {15 Kgf·cm}.
Anchor
attachment
Notes
Attach the glass
shelves
1
Attach the eight glass shelf
supports to the frame.
Insert the glass shelf supports into the holes of the frame,
checking that they are parallel and level.
Glass shelf support
Note
To Next Page
Loading...
