Sony TA-E2000ESD User Manual

=
Warning
BRP Ge So ee eee
Owner’s Record
The model and serial numbers are located at the rear.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your
Sony dealer regarding this product.
Mode! No.TA-E2000ESD Serial No.
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
CAUTION
RISK OF ELECTRIC SHOCK
00 NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
*The graphical symbols are on the rear enclosure.
For the customers in Canada
CAUTION:
TO PREVENT ELECTRIC SHOCK, DO NOT USE
THIS POLARIZED AC PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
This apparatus complies with the Class B limits for
radio noise emissions set out in Radio Interference
Regulations.
INFORMATION
This equipment generates and uses radio frequency
energy and if not installed and used properly, that is, in
strict accordance with the manufacturer's instructions,
may cause interference to radio and television reception.
It has been type tested and found to comply with the
limits for a Class B computing device in accordance
with the specifications in Subpart J of Part 15 of FCC
Rules, which are designed to provide reasonable
protection against such Interference in a residential
installation. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try
to correct the Interference by one or more of the
following measures:
Reorient the receiving antenna
Relocate the equipment with respect to the receiver
Move the equipment away from the receiver
Plug the equipment into a different outlet so that
equipment and receiver are on different branch circuits.
if necessary, the user should cousult the dealer or an
experienced radio/television technician for additional
suggestions. The user may find the following booklet
prepared by the Federal Communications Commission
helpfull:
“How to identify and Resolve Ratio-TV Interference
Problems”. This booklet is available from the U.S.
Government Printing Office, Washington DC 20402,
Stock No. 004-000-00345-4.
When the control S cord connection causes
interference to a TV or tuner, use the supplied ferrite
core. Wind the cord around it as close to the
TA-E2000ESD as possible. Close the ferrite core.
TA-E2000ESD
Approx. 1 inch
(2.5 em)|

Sony TA-E2000ESD Specifications

General

Brand	Sony
Model	TA-E2000ESD
Category	Amplifier
Language	English