Sony TA-E2000ESD - Page 36

Simulating the Seat Position
When you sit in the front of a room, you will hear more
direct sound from the front, and the component of
reflected sounds from the front grows as you move to
the rear. Similarly, the component of reflected sound
changes when you move from left to right, and vice
versa. The SEAT POSITION parameters control the
balance of the direct and reflected sound and other
components of sound to simulate your listening
position.
The center position is designated as 0, both in the rear-
front and left-right parameters, and you can adjust the
position in 50 increments in each direction. The higher
the number, the more your position will be offset from
the center of the room.
0 @aw-Ghe,
‘
omen, ee A |S erAmem 6
-
2
;
i
b]
U
.
:
|
t
’
'
3
5
§
;
’
tf
t
La
£
{ree 9:
1 Play back a program source.
36
3 Press the MAIN PARAMETER button to select
SEAT POSITION.
4 Adjust the rear-front parameter.
R-F = xxx appears. (In the xxx digits, set the seat
number from R50 to F50.)
5 Adjust the left-right parameter.
L-R=xxx appears. (In the xxx digits, set the seat
number from L50 to R50.)
HALL 2 and STADIUM sound fields