Sony TA-FE500R Service Manual

MICROFILM
TA-FE300R/FE500R
INTEGRATED STEREO AMPLIFIER
AEP Model
E Model
TA-FE300R/FE500R
UK Model
Australian Model
TA-FE300R
SERVICE MANUAL
SPECIFICATIONS
Photo: TA-FE500R
Amplifier section
DIN power output
TA-FE500R: 75 W+75 W (4 ohms at 1 kHz)
55 W+55 W (8 ohms at 1 kHz)
TA-FE300R: 50 W+50 W (4 ohms at 1 kHz)
40 W+40 W (8 ohms at 1 kHz)
Frequency response
PHONO (20 Hz-20 kHz): RIAA equalization curve
±0.5 dB
TUNER, CD, AUX, TAPE1/DAT,
TAPE2/MD: 7 Hz-70 kHz dB
S/N (network A)
PHONO: 80dB
TUNER, CD, AUX, TAPE1/DAT,
TAPE2/MD: 105 dB
Output voltage/ impedance
REC OUT: 200 mV, 1 kilohm
PHONES: 5 mW (at 8 ohms)
Speakers impedance:
4-16 ohms, 8-16 ohms (SPEAKERS A+B)
Damping factor
TA-FE500R: 60 (8 ohms, 1 kHz)
General
System
Power amplifier: Pure-complementary SEPP OCL
power amplifier with all stages directly coupled
Preamplifier. Low-noise, equalizer amplifier
Power requirements
Models not supplied with a voltage selector:
220-230 V AC, 50/60 Hz
Models supplied with a voltage selector:
120, 220, or 240 V AC, 50/60 Hz
Power consumption
TA-FE500R: 160 W
TA-FE300R: 120 W
Dimensions (approx.) (w/h/d):
430×105×290 mm
incl. projecting parts and controls
Mass (approx.)
TA-FE500R: 4.7 kg
TA-FE300R: 4.3 kg
Supplied accessories
Remote commander (remote) (1)
RM-S315
Sony batteries SUM-3 (NS) (2)
Design and specifications are subject to change without
notice.
+0
–3

Sony TA-FE500R Specifications

General

Speaker load impedance	4 to 16 ohms
Signal-to-Noise Ratio	100 dB
Damping factor	100
Input sensitivity	150mV (MM)
Dimensions	430 x 150 x 350 mm

Summary

Audio Amplifier Specifications

Amplifier Section Performance

Details DIN power output, frequency response, S/N ratio, and impedance characteristics.

General Unit Specifications

Covers system type, power requirements, consumption, dimensions, mass, and included accessories.

General Information and Controls

Index to Parts and Controls

Provides a comprehensive index of all parts and controls for the unit, aiding in identification.

Circuit Diagrams and Layouts

Circuit Boards Location Overview

Shows the physical placement and identification of all circuit boards within the amplifier unit.

Exploded Views of Unit Components

Front Panel and Case Exploded View

Displays an exploded view detailing the front panel and case components for assembly reference.